Offset questions to make wheels flush.
Thread Starter
Driver School Candidate
Joined: Feb 2017
Posts: 20
Likes: 1
From: Oregon
Offset questions to make wheels flush.
hey there, i've been bugging the forums ever since I got these wheels, but i'm hoping this is my last post regarding my setup.
Long story short, i have a 2010 is350 RWD with the stock lobster claw wheels. These were 18x8.5 with a et48??? Offset On 225/40/r18 and 255/40r18 tires on the rear. Recently i bought rc350 f sport awd wheels which are 19x8 with a et45 offset on 235/40r19 all the way around.
I'm looking to buy 235/35r19 tires so my ride height goes down, and the rubbing goes away.
While I buy tires, i want to buy spacers to fill the gap between the wheel and outside of my fender. The stock wheels filled a little more, but there was definitely room for improvement.
how big of spacers should I use in the front/back?
Long story short, i have a 2010 is350 RWD with the stock lobster claw wheels. These were 18x8.5 with a et48??? Offset On 225/40/r18 and 255/40r18 tires on the rear. Recently i bought rc350 f sport awd wheels which are 19x8 with a et45 offset on 235/40r19 all the way around.
I'm looking to buy 235/35r19 tires so my ride height goes down, and the rubbing goes away.
While I buy tires, i want to buy spacers to fill the gap between the wheel and outside of my fender. The stock wheels filled a little more, but there was definitely room for improvement.
how big of spacers should I use in the front/back?
Thread
Thread Starter
Forum
Replies
Last Post
isgolfpro
IS - 2nd Gen (2006-2013)
1
Jul 20, 2010 08:42 PM