wheels and tires ?
Ok I'm interested in putting 20 on the lex....wanted to would it be possible with out cutting or rolling fenders..my ride height is stock the rims are mounted with tires The front tires are 225-35, and the rears are 255-35...Will it fit !! :eek2:
|
It depends on the offset of the wheels. 255 is pretty wide for no rolling or shaving.
|
Epic fail.
|
If u already got it, just try putting it on...
|
here is my original thread with 20s on it and factory ride height. i had to roll the quarters but i had 275/40s on 20x9.5s and the only reason i had to roll was when i hit bumps it scraped. so with the smaller tires depending on width of the wheel you might get away with it
|
OK im gonna mount them and see what happens
|
im running stock height
rims: 19x8.5 +43 offset tires: 225/19/35 in front 235/19/35 in rear i rolled the rear fenders as i would scrape the tire on the fender when the car would dip while on the interstate, a pothole....or pulling out of my driveway lol the front just had to bend up the little tabs and was good to go getting ready to put 10 mm wheel spacers on the rear, let ya know how it goes *crosses fingers* |
If you mount the 20's don't post pictures here
(because probably no one will like it) Just a fair warning :D |
Please sell your car. I dont even wanna know that someone would potential put 20s on the same car I drive and love.
|
Originally Posted by bernieis
(Post 6164944)
please sell your car. I dont even wanna know that someone would potential put 20s on the same car i drive and love.
|
Evil people lol bashing big rims ...I hate the look of slammed cars but i keep it to myself lol:D
|
to each his own. cant be mad because he doesnt like what all of us like
|
There are things that you just do not do and putting 20s on an 1IS is one of them
|
Originally Posted by BernieIS
(Post 6166656)
There are things that you just do not do and putting 20s on an 1IS is one of them
https://pictures.topspeed.com/IMG/cr...d-1_800x0w.jpg But if the OP likes his 20s, then that's all that should matter to him. Like someone said above though, just don't expect a lot of people on here, or my.is especially, to like it :) |
Originally Posted by shhhua
(Post 6167180)
I'm with you on 20's not looking good on a 1IS. I think David Huang's IS is the only one with 20's that I've seen that I didn't think it looked terrible.
https://pictures.topspeed.com/IMG/cr...d-1_800x0w.jpg But if the OP likes his 20s, then that's all that should matter to him. Like someone said above though, just don't expect a lot of people on here, or my.is especially, to like it :) 1. The stance is perfect, there is no gap at all 2. The style of the wheel actually makes the wheel look smaller than it is. I still do not like the idea of 20s because most people are not willing to spend the money for a good wheel. They cheap out and end up with a ****ty wheel and a ****ty look. |
All times are GMT -7. The time now is 03:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands