Ok guys so i was rotating my tires and when i tried to take off one of my back wheels i snapped the damn bolt . Can anyone tell me what it's called so i can replace it. Thanks

 

it sounds like you need a new lug nut stud and new lug nut

 

Thanks 03Lex. I just got the new Stud and nut. Now the fun part of replacing it begins.

 

haha, they arent too bad in replacing, just knock the old one out with a hammer and put the new one in place and the easiest way to put it on is to stick like a nut on there bigger than the threads on the stud but not too big and run the new lug nut on there with a 1/2" impact and it will draw the lug nut stud tight in the hub, just dont tighten it too much or you will need another stud and lug nut lol. just make sure the stud is in there all the way.

 

next time don't go all Incredible Hulk on your poor car!

 

I know right. i think when i torqued it down the first time i over tightened it and stripped the stud.

 

very possible, torque sticks and a 1/2" impact are ideal for rotating tires