DIY puddle light led
#271
[QUOTE=16GSF00336;10066737]That 3rd bulb could fit...Its the length thats the concern...I myself wanted to put the Biggest/Brightest...However, the I bulb I end up with is Super Bright...[/QUOTE
Which bulb did you go with?
Which bulb did you go with?
#272
Pole Position
iTrader: (5)
It was on ebay, search for this
2Pcs License Plate Light Auto Bulb T10 Canbus 194 921 COB W5W LED for Benz BMW
current link https://www.ebay.com/itm/2Pcs-License-Plate-Light-Auto-Bulb-T10-Canbus-194-921-COB-W5W-LED-for-Benz-BMW/152575671115?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
#273
Pole Position
iTrader: (5)
Really all of these would fit, there is room. What is important is to find a bulb that puts light out to the side as the bulb sits sideways in the housing Hence this two sided flat LED is ideal. That 3rd bulb is disappointing compared to bulb 1 tbh
Last edited by EyeKutr; 12-30-17 at 12:13 AM.
#274
Intermediate
having this problem on my driver side, now too. did you ever figure out what caused it? i took it apart and reassembled it, everything seems to be lined up properly. i noticed that if i tightened the screws stronger, the rattling is more noticeable. can't figure out what's causing it.
#275
having this problem on my driver side, now too. did you ever figure out what caused it? i took it apart and reassembled it, everything seems to be lined up properly. i noticed that if i tightened the screws stronger, the rattling is more noticeable. can't figure out what's causing it.
#277
Pole Position
So what is the consensus on which bulbs to use, I like Vleds will they project good bright light?
Trying the vleds 194's we'll see..
Trying the vleds 194's we'll see..
Last edited by Superman60; 02-15-18 at 07:16 AM.
#278
#280
Lexus Champion
Originally Posted by Speed3381
Omg...I'm trying my best to pull the mirrors out (Step 1) but I can't get it off. I don't want to crack the mirror also. I'm pulling so hard and no result. Any tips guys?????
#281
im pulling and pulling but I feel so scared I’m going to either crack the glass or break something underneath it 😓
#283
Lexus Test Driver
It may be hard for you to believe, but you really are not pulling hard enough. Apply constant, ever-increasing, pulling force until it releases. Change your mindset to where you are intentionally trying to break something - and you'll safely remove the glass.
#284
Do I just keep pulling as hard as I can or do I need to use my fingers to unattach something from behind? 😓 Please help. Thank you.
#285
Lexus Test Driver
If you are not familiar with how the mirror is held in place it should help you to see that there are four tabs (see image below) that hold the mirror in place. As you apply pulling force the tabs will most likely release individually at the location where you are able to apply the most force, which will likely be the bottom tab closest to the car door first, and then the other bottom tab furthermost from the car door, then the upper two tabs will likely be the last to release.
Last edited by bclexus; 07-01-18 at 10:46 AM.