Dyno 2013 GS350
#1
Dyno 2013 GS350
Had a great meet down in Miami today at JM Lexus and had the chance to catch up with IAMJAVEDG who built a bada$$ 4th GS..I'll post up some pics later but here is a dyno video of his car with PPE Race Headers + Meisterchaft GTC Exhaust System with valves . Enjoy
Updated
http://www.flickr.com/photos/tonypphotos/8117998722/http://www.flickr.com/photos/tonypphotos/8117998722/ by http://www.flickr.com/people/tonypphotos/, on Flickr
http://www.flickr.com/photos/tonypphotos/8117989197/http://www.flickr.com/photos/tonypphotos/8117989197/ by http://www.flickr.com/people/tonypphotos/, on Flickr
http://www.flickr.com/photos/tonypphotos/8117989307/http://www.flickr.com/photos/tonypphotos/8117989307/ by http://www.flickr.com/people/tonypphotos/, on Flickr
http://www.flickr.com/photos/tonypphotos/8118000154/http://www.flickr.com/photos/tonypphotos/8118000154/ by http://www.flickr.com/people/tonypphotos/, on Flickr
Updated
http://www.flickr.com/photos/tonypphotos/8117998722/http://www.flickr.com/photos/tonypphotos/8117998722/ by http://www.flickr.com/people/tonypphotos/, on Flickr
http://www.flickr.com/photos/tonypphotos/8117989197/http://www.flickr.com/photos/tonypphotos/8117989197/ by http://www.flickr.com/people/tonypphotos/, on Flickr
http://www.flickr.com/photos/tonypphotos/8117989307/http://www.flickr.com/photos/tonypphotos/8117989307/ by http://www.flickr.com/people/tonypphotos/, on Flickr
http://www.flickr.com/photos/tonypphotos/8118000154/http://www.flickr.com/photos/tonypphotos/8118000154/ by http://www.flickr.com/people/tonypphotos/, on Flickr
Last edited by IndecentSC; 10-24-12 at 07:07 PM.
#2
So what were the numbers?
#4
Lexus Champion
iTrader: (5)
Join Date: Oct 2007
Location: FL
Posts: 2,735
Likes: 0
Received 0 Likes
on
0 Posts
It's actually Fire Agate Pearl
PPE Race Headers + Meisterchaft GTC Exhaust System with valves, it's a bit quiet with the valves closed.. the numbers didn't show up - dyno wasn't reading correctly.
PPE Race Headers + Meisterchaft GTC Exhaust System with valves, it's a bit quiet with the valves closed.. the numbers didn't show up - dyno wasn't reading correctly.
#5
that's FAP? looks like you have a chameleon on your hands. i would have bet my car that it was obsidian. you really did do a good job with her though.
#6
Lexus Champion
iTrader: (5)
Join Date: Oct 2007
Location: FL
Posts: 2,735
Likes: 0
Received 0 Likes
on
0 Posts
I don't daily drive it at the moment so the race headers don't bother me but eventually I plan on replacing them with another set of PPE Engineering headers with high flow CAT's
These were just a prototype set for SEMA the setup sound's amazing... it's almost impossible to capture the sound correctly with a camera but those who have heard it in person will tell you - it sounds like the car has a V10 at mid range it has this perfect pitch while pulling 1st - 3rd gears
Trending Topics
#10
#11
The raspy noise are the headers. its not the exhaust. most likely the exhaust system is missing a couple of resonators and cat to drone out the noise. upgrading the headers will make that noise on an N/A car. its actually worst on a 4 cylinder car.
#12
Lexus Champion
iTrader: (5)
Join Date: Oct 2007
Location: FL
Posts: 2,735
Likes: 0
Received 0 Likes
on
0 Posts
Race Headers + Free Flowing Pipes with an X-Pipe in between. (cut out valve was open during those pulls)
I'll be swapping the headers back to OEM for another video, and then to a set of PPE headers with High Flow Cats
That is correct
#15
Lexus Champion
Man I wish I knew this meet was going on! Cool to know people are from the Pines area on here lol. I bought my 4GS from Lexus of Pembroke Pines and live down the street from the dealership. I would have loved to see this car in person.