Aimgain International bumper conversion
#16
Instructor
Thread Starter
Got my order delivered to the shop today. Will stop by tomorrow to take a look (will take some pics of the parts). With the type 2 valence, I will need to either get a new quad tip axle back (apexi) or just get a quad tip added onto my Joe Z. I think apexi is a bit louder which I'm not too fond of since Joe Z is loud enough with the apexi midpipe that I already have (plus that's additional $1k that I rather spend on something else). Anyone with the quad tip insert? Does it look funky?
Want to do this conversion so bad, but waiting to hear back from your experience...please update us on fitment.
Any chance you can PM me where you purchase and price and all the part # needed for the conversion?
I want to get my order in since it takes so long to build and ship.
#17
Which is why the eBay plastic bumper is such a great deal. It's plastic so it's easy to work with and make your own cutouts. And it costs only $800 shipped. I'm still planning on getting it but once my finances are a bit better. Aimgain is fiberglass, I absolutely hate making cutouts in fiberglass, it's awful.
#18
Instructor
Thread Starter
Which is why the eBay plastic bumper is such a great deal. It's plastic so it's easy to work with and make your own cutouts. And it costs only $800 shipped. I'm still planning on getting it but once my finances are a bit better. Aimgain is fiberglass, I absolutely hate making cutouts in fiberglass, it's awful.
#19
I've seen enough pictures of that bumper installed to know that its fitment is 90% good. The only issue I constantly see raised is the gap between the hood and the grill. I black out my chrome anyways so it's hard to notice. I also intend to add molding between the hood and the grill to reduce that gap. $800 for good fitment vs $3.5K+ for perfect fitment? I'll happily take good fitment for $800.
#22
https://www.ebay.com/itm/13-15-Lexus-GS350-GS450-Front-Bumper-F-Sport-Conversion-Kit-Fog-Lights-Grille/273441624071?fits=Model%3AGS350&hash=item3faa641007:g:SkkAAOSwhyZbqAYQ:rk:2f:0
#23
Racer
iTrader: (1)
By the way, here is the link to the plastic bumper, you'll see it looks almost identical. And I prefer this one over the Aimgain. I was going to spend $460 to get the foglight added to my current bumper but I might as well save a little more and just buy the bumper. My only concern is getting it painted the perfect Lexus ultrawhite (paint code 083).
https://www.ebay.com/itm/13-15-Lexus...qAYQ:rk:2:pf:0
https://www.ebay.com/itm/13-15-Lexus...qAYQ:rk:2:pf:0
#25
It's not difficult... see below. Just take a drill and go straight in. They are held in by tabs.
I found the part numbers for the tabs 89348-33110
Looks like it's just held on with double sided tape
https://www.ebay.com/itm/173453725948
Looks like it's just held on with double sided tape
https://www.ebay.com/itm/173453725948
#26
Advanced
iTrader: (5)
Wonder if whoever is making them at least put markings on inside for easy holes cut...
#28
Guys, they are sensors.... it doesn't matter how you mount it, as long as it's not being obstructed.
#29
Lexus Test Driver
iTrader: (1)
You spend all that money on a bumper and you still have to drill holes in fiberglass, kind of ridiculous. Not to mention the holes have to be the perfect size and in the exact same spot on each side otherwise it will look off.
The eBay bumper presents a much better bargain and plastic much easier to work on. I'm sure of the 11 bumpers they sold, someone figured out how to install it. Otherwise they would have pulled the item if everyone wanted their money back.
Unfortunately the one guy who bought this on this forum for test fit gave up and hasn't replied/updated that thread.
The eBay bumper presents a much better bargain and plastic much easier to work on. I'm sure of the 11 bumpers they sold, someone figured out how to install it. Otherwise they would have pulled the item if everyone wanted their money back.
Unfortunately the one guy who bought this on this forum for test fit gave up and hasn't replied/updated that thread.
#30
Rookie
iTrader: (3)
I knew that the washer and parking sensors are not pre-drilled when i placed the order and since my body shop is doing the work, i'm not too worried about it but I do agree that if I pay that much it should have came with it. What i was disappointed however is the fact that there are one too many "imperfections" to the bumper, not the "high quality Japanese marksmanship" that I thought. The shop will place a layer of flexible bondo and smooth out all the imperfections.
As for updates on this process, the shop is a well known shop and they're quite busy with other projects too so it may take a while. I rather have them take their time and do it right then do a half *** job (which I know they won't). I waited almost 6 months, what's another month or two
As for updates on this process, the shop is a well known shop and they're quite busy with other projects too so it may take a while. I rather have them take their time and do it right then do a half *** job (which I know they won't). I waited almost 6 months, what's another month or two
The following users liked this post:
jdpdata (10-29-18)