aluminum mode switch cover
Pole Position
Joined: Apr 2018
Posts: 327
Likes: 100
From: Arizona
Thread Starter
Rookie
Joined: Jul 2004
Posts: 58
Likes: 4
From: International
MSRP was 9,000 JPY plus local shipping so I would say somewhere around $100 plus airfreight?
I think the freight would be like $10 via EMS to the states no matter what the quantity.
Please let me know if you are still interested.
I think the freight would be like $10 via EMS to the states no matter what the quantity.
Please let me know if you are still interested.
Thread Starter
Rookie
Joined: Jul 2004
Posts: 58
Likes: 4
From: International
And by the way the lower ring is secured by double side tape but the switch cover is not actually adhesed to the factory switch.
I mean, you CAN use double side tape but the instructions told not to and use vinyl tape instead.
You place 1 or 2 layers of vinyl tape on the inside and kind of squeeze it in.
Not sure if I am explaining it right.
I mean, you CAN use double side tape but the instructions told not to and use vinyl tape instead.
You place 1 or 2 layers of vinyl tape on the inside and kind of squeeze it in.
Not sure if I am explaining it right.
Instructor
Joined: Mar 2018
Posts: 1,059
Likes: 275
From: California
