Easy access system drivers seat & steering wheel

Reply Subscribe

Thread Tools

Search this Thread

Nov 2, 2013 | 09:19 AM

Kajn

Thread Starter

Rookie

Joined: Oct 2013

Posts: 58

Likes: 0

From: LA

Easy access system drivers seat & steering wheel

I've looked everywhere on the GS 350 4th gen and can't find a topic on this. I noticed a few days ago that my drivers seat and steering wheel don't move when I turn the engine off or on and/or I open the driver's door. I know it did it when I test drove the vehicle. I have my seat, steering wheel and review mirrors set on the #1 setting and it works fine. I also checked the personal settings and my drivers seat easy exit is set to the FULL position. Don't know what else to check, please help.

- Marsha, alias Kajn

Nov 3, 2013 | 02:39 AM

Chris8152

Pit Crew

Joined: Apr 2012

Posts: 240

Likes: 31

From: UK

I have had this problem a couple of times, all I have done is with the ignition on, pressed the seat memory 1 button, everything moves into place and that seemed to rectify it.
Iam not sure but I think it happens if you move the seat without the ignition on, I have done this when hovering out the car.

Nov 3, 2013 | 05:37 AM

Kajn

Thread Starter

Rookie

Joined: Oct 2013

Posts: 58

Likes: 0

From: LA

Quote:

Originally Posted by Chris8152

I have had this problem a couple of times, all I have done is with the ignition on, pressed the seat memory 1 button, everything moves into place and that seemed to rectify it. Iam not sure but I think it happens if you move the seat without the ignition on, I have done this when hovering out the car.

Thanks Chris! My problem, is my memory is set on memory #1 button and it is good, never moves out of place. But it makes entering & exit a bit tough is how I came to notice that my easy access isn't working. My seat nor my steering wheel isn't moving to give me easy access going in or out. It's as if...once I set my memory that stopped working. Does that make sense?

Thanks!

Nov 3, 2013 | 07:22 AM

kdsr123

Pole Position

Joined: Mar 2012

Posts: 206

Likes: 1

From: tx

Take off your seat belt and it'll move back. Also check in the system settings, make sure easy out goes full back.

Nov 3, 2013 | 08:01 AM

GSTONY

Lead Lap

Joined: Mar 2012

Posts: 539

Likes: 2

From: Ontario

No that dosent make sense everytime I go in and out seat and steering wheel moves

Nov 3, 2013 | 09:34 AM

Kajn

Thread Starter

Rookie

Joined: Oct 2013

Posts: 58

Likes: 0

From: LA

Quote:

Originally Posted by kdsr123

Take off your seat belt and it'll move back. Also check in the system settings, make sure easy out goes full back.

Okay KDSR you are correct!! My problem was... I have an extension and I wasn't removing it therefore when you mentioned take off my seat belt, it struck a brain cell that even though I'm taking off my seat belt, my extension is still in. So I took it out and badda bing, it worked. Thanks so much!