high HC at idle
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2014
Location: ca
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
high HC at idle
I did not pass smog due to a high HC at idle ( 177 at 650 rpm) no check engine light or codes posted I've changed both o2 sensors on bank 1 new denso spark plugs new air filter oil change cleaned the air box checked for leaks on all vacuum lines and hoses and still high HC any ideas everything else is fine the HC is normal when at 2500 rpm my visuals and equipment always pass. Can this be due to the customer support program with misfired for my 06 gs300 that is notorious plz help
#2
http://www.smogtips.com/failed-high-hydrocarbons-HC.cfm
I've never really read into high HC, your next goal might be to check your injectors to see if it's running in tip top shape.
Ultimately, you may also need to run a compression check too, to make sure all 6 cylinders are within spec.
GL!
I've never really read into high HC, your next goal might be to check your injectors to see if it's running in tip top shape.
Ultimately, you may also need to run a compression check too, to make sure all 6 cylinders are within spec.
GL!
#3
Driver School Candidate
Thread Starter
Join Date: Mar 2014
Location: ca
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
high hc at idle
http://www.smogtips.com/failed-high-hydrocarbons-HC.cfm
I've never really read into high HC, your next goal might be to check your injectors to see if it's running in tip top shape.
Ultimately, you may also need to run a compression check too, to make sure all 6 cylinders are within spec.
GL!
I've never really read into high HC, your next goal might be to check your injectors to see if it's running in tip top shape.
Ultimately, you may also need to run a compression check too, to make sure all 6 cylinders are within spec.
GL!
Thread
Thread Starter
Forum
Replies
Last Post
envyno1
Performance & Maintenance
4
03-15-08 08:33 PM