Hey CL!

I'm prepping for next summer for wheels for my AWD 3GS. I'm thinking of doing 20x10 all around offset of 38, because that's what they only offer for the set of wheels I want to get. But I'm thinking of possible doing a 10-15mm to bring them down a bit. Is +28 / +23 a lot of pulling and fender rolling?

 

It all depends on you.... get the wheels first, fit it and purchase spacers according to your suit

 

Heres my set up on my AWD GS i have 20x9 +22 up front and 20x10.5 in the rear +22 rides good apart from the vibrations and wobbling caused by the aftermarket BC Racing coils. But if you need help with suggestions just shoot me a message or something im willing to help you with the decision.

 

Not too much will need to be done to get them to work. Maybe just a shave

PS - Don't roll your fenders, you will regret it. Shave them.

 

your car is sooo dope.!

 

nice n clean! i got the same setup, just everything all silver and not that low lol

+1.... shaved my rears, love it.. rolled the fronts

 

Thank you and i have just rolled my rear fenders not shaved them and the fronts i havent done anything except cut a lil of the fender liner on the front otherwise its fine only when i go on a slope at an angle the rear wheels go inward and rub the metal but otherwise its good. My next plan is to get air ride setup for my car.

Thank you i was actually trying to get silver CV1s but i got these and almost everyone have told me that it matches the color and stuff so i stuck with these. Next thing i want to work on is Air ride.