When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I really love the way you mounted your front license plate.. Mind sharing on how. DIY would be greatly appreciate it.
Thanks, all I did was take a metal blade and put it on my 10" dewalt miter saw. I measured the size of the lower grill and cut the vertical sections of the frame down to size and then the license plate to fit taking from the top and bottom to keep centered. I then screwed self tapping screws through the frame into the tag for the bottom piece and then took screw in anchors from home depot into the mesh grille(they fit perfect into the mesh spaces) roughly where I wanted it to attach and screwed the mounting screws through the upper part of the frame into those. To be honest its kinda fudged but turned out good. it really needs a tack weld where the frame has been cut but oh well, it seems to keep the cops from pulling me over for no tag and I don t have holes in my bumper. Hope this helped!
Thanks, all I did was take a metal blade and put it on my 10" dewalt miter saw. I measured the size of the lower grill and cut the vertical sections of the frame down to size and then the license plate to fit taking from the top and bottom to keep centered. I then screwed self tapping screws through the frame into the tag for the bottom piece and then took screw in anchors from home depot into the mesh grille(they fit perfect into the mesh spaces) roughly where I wanted it to attach and screwed the mounting screws through the upper part of the frame into those. To be honest its kinda fudged but turned out good. it really needs a tack weld where the frame has been cut but oh well, it seems to keep the cops from pulling me over for no tag and I don t have holes in my bumper. Hope this helped!
Thanks for the info. I also dont have any holes on my front bumper.. Will hate to drill holes to it. I got pulled over couple times for no front plates already.. The way you mounted yours looks good and clean.