When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
On a budget, and replacing the entire middle section seems excessive when I could just glue a badge on!
Anyone here know what dimensions I should be looking for on ebay? Any adhesive or application recommendedations? Anyone else try this and have pictures they can share?
What your considering is like a bald dude putting on a wig.
Better to imbrace your badgelessness than to try and cover it up. Anything other is gonna scream ghetto. Not that there’s anything wrong with ghetto, but I don’t it’s the look your after.
My advise: Just wait til you have enough funds to get what you really need.
No, no badge was ever on that wheel. That wheel is from a 98-00. 01+ all have the badge. It'll look bad so like the other guy said, embrace it. Or buy a Nardi deep dish wood wheel if you got some spare cash.
Easiest thing to do for a 98-00 wheel upgrade is replace with 01+ GS300 or GS430 or 01+ RX300. Just ensure it has the single stage (1-connector) airbag inflator and it is a direct swap. I have a wood wheel from an 01 RX300 in my 99 GS3. These are easy to find in the junkyards for pretty cheap.
And here I am removing all the badges from my cars, just as fast as I can.
It turns out I usually can remember what brand of car it is, even from the driver's seat.
Steering wheel swap is what you need if you want the chrome L badge.
03-21-19, 11:20 AM
Gluing Lexus Emblem Onto Steering Wheel?
