What did you do to your GS today?
#2192
Driver School Candidate
Join Date: Sep 2014
Location: miami
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
So I have had a lot done since my last update but here is a quick look of something that some of you guys may or may not like lol. I made some of those homedepot side skirts and think they came out good. Might not be everyone's taste though. I also had lowered my car on BC, got new wheels (Rays G Games...old school), installed Megan RCAs, windshield vinyl visor, eyelids.
Upcoming items that has been ordered: LS400 calipers with slotted rotors, tail lights from Japan, blackwood vinyl to do interior wrap of brown wood (Not able to find a blackwood set with the 4 buttons for the center console), Megan front and rear sway bars.
Thinking of ordering the under chassis braces from ultra racing but waiting on the sway bars to see how the car feels. I need 20mm spacers for the rear but waiting to sell my 25mm spacers first. I need a rear bumper lip but undecided what to get as yet. Also, thinking of getting a new trunk without the OEM spoiler. 2jzgte is in the plans this year but may get delayed due to house purchase. The 2jz ge is actually fast enough for me :/ However, I want to hear some blow off lol.
Note: Kind of hard to see the side skirts but I couldn't get a better pic. Ideally I want L Tuned side skirts....but not willing to pay 400+ usd.
Upcoming items that has been ordered: LS400 calipers with slotted rotors, tail lights from Japan, blackwood vinyl to do interior wrap of brown wood (Not able to find a blackwood set with the 4 buttons for the center console), Megan front and rear sway bars.
Thinking of ordering the under chassis braces from ultra racing but waiting on the sway bars to see how the car feels. I need 20mm spacers for the rear but waiting to sell my 25mm spacers first. I need a rear bumper lip but undecided what to get as yet. Also, thinking of getting a new trunk without the OEM spoiler. 2jzgte is in the plans this year but may get delayed due to house purchase. The 2jz ge is actually fast enough for me :/ However, I want to hear some blow off lol.
Note: Kind of hard to see the side skirts but I couldn't get a better pic. Ideally I want L Tuned side skirts....but not willing to pay 400+ usd.
Last edited by blaze4g; 02-01-18 at 03:32 PM.
#2193
Driver School Candidate
Timing belt and now doing crankshaft seal along with cam seals
Started off with a click clack metal slapping noise which goes away after a 15swconds havent started it again but was told timing needs replacing 2003 gs430. Also had a oil leak in cam seal also in spark plug housing. So now im changing all i can. Need any assistance on removing cam seals as well as crankshaft seals.
#2194
Driver School Candidate
Started off with a click clack metal slapping noise which goes away after a 15swconds havent started it again but was told timing needs replacing 2003 gs430. Also had a oil leak in cam seal also in spark plug housing. So now im changing all i can. Need any assistance on removing cam seals as well as crankshaft seals.
#2195
blaze4g,
You and I have similar taste. look here what I've done to my interior, also note I do have an extra set of Black wood door trim..
carbon fiber wrap for ctr console
carbon fiber wrap for ctr console and ashtray
Black wood steering wheel from Japan
Black wood
Black wood
You and I have similar taste. look here what I've done to my interior, also note I do have an extra set of Black wood door trim..
carbon fiber wrap for ctr console
carbon fiber wrap for ctr console and ashtray
Black wood steering wheel from Japan
Black wood
Black wood
Last edited by DWCOILE; 02-02-18 at 08:59 AM. Reason: add on
The following users liked this post:
LexLova (04-09-20)
#2196
Instructor
iTrader: (24)
Started off with a click clack metal slapping noise which goes away after a 15swconds havent started it again but was told timing needs replacing 2003 gs430. Also had a oil leak in cam seal also in spark plug housing. So now im changing all i can. Need any assistance on removing cam seals as well as crankshaft seals.
https://www.clublexus.com/forums/att...tb-removal.pdf
Let me know how you make it and what procedure you use to remove the cams.
Good luck with the project.
#2200
#2203
Driver School Candidate
GS300 Transition
Currently updating my 2001 GS300.
ENGINE:
Stage 6 Motorsports Custom Turbo Kit Precision Turbo 6266 Journal Bearing Turbo Dual Precision Turbo 40mm Wastegates Turbosmart Race Port Blow Off Valve
3” SS304 Downpipe w/ Flex Joint
3” SS304 Midpipe
SS304 Dump Tubes
2 1⁄2” Painted Black Intercooler piping
3” Painted Black Intake Pipe
Front Mount Intercooler Kit
Oil Feed and Return Kit w/ Fragola fittings 3” K&N Filter
Gate Racing Timing belt Kit
AEM ELECTRONICS FIC UNIVERSAL 6-CHANNEL FUEL IGNITION CONTROLLER PIGGY BACK COMPUTER
SUSPENSION:
AIRLIFT AIR BAGS 3P SYSTEM
StopTech Street Axle Pack; Slotted Rotors; 4 Wheel Kit 934.44011 Front and Rear
T-DEMAND UPPER, LOWER CONTROL ARMS, SWAY BARS
WHEELS:
WEDS MAVERICK 910M 19 inch
Haven’t started on the interior and still need to repaint the car.
ENGINE:
Stage 6 Motorsports Custom Turbo Kit Precision Turbo 6266 Journal Bearing Turbo Dual Precision Turbo 40mm Wastegates Turbosmart Race Port Blow Off Valve
3” SS304 Downpipe w/ Flex Joint
3” SS304 Midpipe
SS304 Dump Tubes
2 1⁄2” Painted Black Intercooler piping
3” Painted Black Intake Pipe
Front Mount Intercooler Kit
Oil Feed and Return Kit w/ Fragola fittings 3” K&N Filter
Gate Racing Timing belt Kit
AEM ELECTRONICS FIC UNIVERSAL 6-CHANNEL FUEL IGNITION CONTROLLER PIGGY BACK COMPUTER
SUSPENSION:
AIRLIFT AIR BAGS 3P SYSTEM
StopTech Street Axle Pack; Slotted Rotors; 4 Wheel Kit 934.44011 Front and Rear
T-DEMAND UPPER, LOWER CONTROL ARMS, SWAY BARS
WHEELS:
WEDS MAVERICK 910M 19 inch
Haven’t started on the interior and still need to repaint the car.