Notices
GS - 2nd Gen (1998-2005) Discussion about the second generation GS300, GS400 and GS430 (1998 - 2005)

Help Identifying Front End Pop..

Thread Tools
 
Search this Thread
 
Old Jan 29, 2012 | 04:54 PM
  #31  
bashigs300's Avatar
bashigs300
Pole Position
 
Joined: Jan 2012
Posts: 214
Likes: 0
From: Missouri
Default

Well I put new lower bj and the noise is still there. It looks like its make the most noise when I turn. Nothing seemed lose at all. It's possible The strut bushing is bad. I'll put coilovers on this spring and see if it would fix it.
Reply
Old Jan 29, 2012 | 04:55 PM
  #32  
LuxuryGS3's Avatar
LuxuryGS3
Thread Starter
Lexus Champion
iTrader: (12)
 
Joined: Mar 2010
Posts: 2,292
Likes: 6
From: Dallas, Texas
Default

Originally Posted by bashigs300
Well I put new lower bj and the noise is still there. It looks like its make the most noise when I turn. Nothing seemed lose at all. It's possible The strut bushing is bad. I'll put coilovers on this spring and see if it would fix it.
Possible. I hope that fixes your issue 'cause lord knows how annoying our cars can be when it comes to front end sounds, haha.
Reply
Old Jan 29, 2012 | 08:02 PM
  #33  
monkey92's Avatar
monkey92
Lead Lap
iTrader: (3)
 
Joined: Apr 2011
Posts: 750
Likes: 8
From: texas
Default

Possible. I hope that fixes your issue 'cause lord knows how annoying our cars can be when it comes to front end sounds, haha.
or the rear like im having now
Reply
Old Apr 7, 2012 | 03:48 PM
  #34  
bashigs300's Avatar
bashigs300
Pole Position
 
Joined: Jan 2012
Posts: 214
Likes: 0
From: Missouri
Default

so i finally got around to look to see where the clunking noise was from on my left front. i didn't see any noticeable loose parts so i say what if i have the same lose camber bolts as you did so i put the wrench on it and guess what it was lose. i tighten the bolt and the noise is gone now .
Reply
Old Apr 7, 2012 | 07:30 PM
  #35  
Vishuz's Avatar
Vishuz
Pole Position
iTrader: (1)
 
Joined: Jul 2011
Posts: 231
Likes: 0
From: Florida
Default

i have same problem but it pops whenever i stomp on the gas pedal .....o.O
Reply
Old Apr 7, 2012 | 09:01 PM
  #36  
bashigs300's Avatar
bashigs300
Pole Position
 
Joined: Jan 2012
Posts: 214
Likes: 0
From: Missouri
Default

mine did that too. the lower control ARM moves all the time so it'll make noise when the car moves. its easy to find out just take the wheel off and see if its tight.
Reply
Old Aug 8, 2012 | 11:08 PM
  #37  
DeezyLF's Avatar
DeezyLF
Driver School Candidate
 
Joined: Jun 2010
Posts: 23
Likes: 0
From: CA
Default

I have a clicking sound coming from my right right when i am hanging a left turn. And when I straighten it you can feel it in the floor board. I. Changed my Lca #2 arms, and just my upper control arms. I bought a car from a guy 2 years ago and I only put on maybe 10,0000 miles. He said he changed the LBJ. I took it in to lexus and they said i had play in the uca. And said the LBJ was fine. What else should i change? .1998 gs400 205k.lowered on Tein cs sport 19 in rims.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kevfeil
LS - 1st and 2nd Gen (1990-2000)
12
Jan 31, 2011 11:28 AM
rwdanthony
SC - 1st Gen (1992-2000)
6
Jun 10, 2010 07:42 PM
tmf2004
Suspension and Brakes
1
Jan 26, 2009 10:07 AM
HotBoy
SC - 1st Gen (1992-2000)
17
Apr 15, 2004 01:36 PM
persian451
LS - 1st and 2nd Gen (1990-2000)
7
Jul 13, 2003 12:28 AM




All times are GMT -7. The time now is 09:32 PM.