When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The seal from the glass to the fogs. Thats the only possible place
thats not true, it can come in from where the bulb goes in plus possibly from the drain.
...so you think the new ones werent sealed enough from the plastic to the glass and then AFTER they were retroed they werent resealed again? very doubtful john.as i said im gonna resilicon ALL the edges around the glass and then im gonna try this trick from that link i posted before. the last thing i want is my projector's glass to pop like my OEM ones did
Originally Posted by jvxdriver
There's still an opening in the back of the foglight that needs to be sealed up to prevent moisture from coming in. I used the original 9006 rubber boot along with a rubber cap made out of balloon. I cut the balloon in half and cut a small pea-size hole at the top nipple for the H1 bulb to go through. I've used this method before and it seems to work out great, and it's easy too.
doesnt rain to much here... i NOW know how it can affect one side or the other when luxurymods pulled my glass apart they took a chunk out of the plastic and when i shook it, water came out. i did silicon the whole surround AND did the balloon trick. i will post pics satruday monday as im leaving work now
Originally Posted by 1QWKGS4
Face it, you're car is getting old, time for another car Brian!!
i know LS here i come now if someone would total my car i would be straight
so i finally got around to finishing them with the "balloon trick" and some extra silicon
BUT they are back off the car as i woke up this morning to this on the bulbs i bought a month or so ago. i emailed the CL vendor and waiting to hear back from them