The proper subwoofer enclosure for a GS trunk|no trunk rattle *video*&*pics*
#17
Pole Position
Thread Starter
#18
here it is i thought that JL W7 12" would hit like that, but that 10" is proving me wrong. i think it's time for some plexi glass.... don't u think???
good work, enjoy your hearing while u have it too
good work, enjoy your hearing while u have it too
#20
Pole Position
Thread Starter
Yep Str8 VIP, every person that I've showed this to can't believe they are 10's.
Also Kyle Harty I give you props for fitting a XX18 in a trunk car. That takes some skill.
Here's another vid thats worth checking out, the sun reflection makes it look like a sound wave on a oscilloscope...
http://www.youtube.com/watch?v=nbF1GMYvxdA
#23
Pole Position
Thread Starter
#24
Lexus Fanatic
iTrader: (182)
Let me know if you need help on a design w/cutsheet that will fit between the fendwells of the trunk when you get that sub. I'd do a 4th order design on that RE 12" XXX too... The sealed section of the box would be 1.2cuft and the ported section 1.7cuft with a 6" precision aero port tube ported through the factory subwoofer cutout hole so all tha bass stays inside the cabin of the car, no trunk rattle just like my setup
#27
Lead Lap
iTrader: (2)
great idea having that port come through the sub hole. Never seen a box like that. I just finished making a box for my 3 tens and it kinda sucks, the thing is super long and takes up most of the front area of the trunk. I wish i could have made sumthin to fit between the wheel wells
#29
I have a question? Would this box be smaller if only 1 10 inch sub were to be used.
I would like it to just sit on that upper level.
or even possibly 1 12 inch sub like a Diamond Audio D3
I would like it to just sit on that upper level.
or even possibly 1 12 inch sub like a Diamond Audio D3
#30
Driver School Candidate
Join Date: Jan 2010
Location: Pa
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Box design w/cutsheet
Can you supply me with that cut out sheet
That XXX is the sickest sub out there, it's all about the box design and power...
Watch the Excursion @ 0:45 seconds...
http://www.youtube.com/watch?v=dSkpHyg_g1o
Let me know if you need help on a design w/cutsheet that will fit between the fendwells of the trunk when you get that sub. I'd do a 4th order design on that RE 12" XXX too... The sealed section of the box would be 1.2cuft and the ported section 1.7cuft with a 6" precision aero port tube ported through the factory subwoofer cutout hole so all tha bass stays inside the cabin of the car, no trunk rattle just like my setup
Watch the Excursion @ 0:45 seconds...
http://www.youtube.com/watch?v=dSkpHyg_g1o
Let me know if you need help on a design w/cutsheet that will fit between the fendwells of the trunk when you get that sub. I'd do a 4th order design on that RE 12" XXX too... The sealed section of the box would be 1.2cuft and the ported section 1.7cuft with a 6" precision aero port tube ported through the factory subwoofer cutout hole so all tha bass stays inside the cabin of the car, no trunk rattle just like my setup