Need Your Help
i have been wanting to put some 20s on my car for a while now. my only set back right now is that my gs3 is lowered 2". im worried about a rubbing problem that might happen if i put the 20s on. as of right now im thinking that 19s are the biggest size that i will be able to do. i want the wheels to sit flush with the fender. i also wanted to do staggered wheel set up but dont know if i can do that either. any opinions on this dilemma of mine?
It's doable. If you don't want to do fender work, you'll have to go with conservative offsets. Something like 38 front and 45 rear if you do a staggered setup.
Here is a GS with Daizen springs (1.9/1.7) on 20's.
https://www.clublexus.com/forums/sho...d.php?t=114923
Here is a GS with Daizen springs (1.9/1.7) on 20's.
https://www.clublexus.com/forums/sho...d.php?t=114923
Last edited by 400DGRZ; Feb 2, 2008 at 01:56 PM.
way more than 2" drop 
https://www.clublexus.com/forums/sho...38#post3228638
current offset is 15mm front and 18mm rears.

https://www.clublexus.com/forums/sho...38#post3228638
current offset is 15mm front and 18mm rears.
Thread
Thread Starter
Forum
Replies
Last Post
supraclay
SC - 1st Gen (1992-2000)
27
Nov 27, 2012 11:32 AM
chrisgs
Wheels, Tires & Brakes Forum
11
May 1, 2006 07:45 PM







