GATO

iTrader: (1)

Poyet, when you first had shown me that pic of the white on scaras, I thaught it was just a random pic from Japan.

I would have never thaught they were being test fitten on your car

that's crazy 19x10+29 fronts

lexusondubs

iTrader: (9)

HER gs yea baby !!!!

V8_Aristo

The 18x11+22 will stick out about 14mm(just a little over 1/2inch) more than your set up(19x10.5 +29) in the rear.

Ay-nako

iTrader: (25)

Guys thanks so much for the help... my friends kept on telling me the samething about the wheels should camber a little bit when i actually put the car onto the ground and i just didnt listen ... i will try my hardest for some pics just that im so busy with work i dont have enough time to take some... but i will soon thanks so much again for everyones help...

Ay-nako

iTrader: (25)

oops i also forgot to stress out that me being even dumber i didnt actualy drop the car down to see the rim camber a little bc of the last quote i think i might have to pick up some coilovers to make them look pretty good... bc im actually going for the vip look... and again thanks for the info guys...

PHML

iTrader: (33)

Here are some old pics....courtesy of jtanoyo1's gallery....this is a pic of his friends widebody aristo.

Pete

upstateGS4

iTrader: (1)

its obvious after hearing everyone elses response that your wheels basically cant be sticking out as far as you say they are. 5 inches? come on bro. if you want people to help you with an issue like this dont waste peoples time first off post a pic or two, and second get accurate about how far out these things are actually poking out of your fenders so people can actually help you with correct information.. seriously buddy, your wheels sticking out of your car almost half a foot? nah. lol

jtanoyo1

Hehehe, it's sticking out 4-5 inches because your car was still sitting up high on the jackstands and you just did a makeshift measure? You do know when you lower the car, your car will naturally have a bit of neg. camber and you will "lose" half of your problems already. A bit more negative camber, shave clean the inner lip of your fenders or maybe even a bit of a pull should solve your problems.

dle

iTrader: (2)

what the process behing 'pulling' a fender correctly? Does it need a repaint afterwards?

GATO

iTrader: (1)

it will need paint and all only if it's a big pull.

for mild pulls, you can get away with no paint work.

welcome to CL, where in TX are you at?

Ay-nako

iTrader: (25)

yeah sorry again guys ive been so busy still no pics but theyll come soon, and to my amazement i still screwed up some how on tellin you guys the info on my rims the off-set is -22

TLW

wait wait...-22 offset ??

G Star

iTrader: (2)

you're going to try to fit rims that poke out 4 inches in the rear and keep it stock looking at the front? that is really going to look weird.

Ay-nako

iTrader: (25)

sorry to bump an old thread but this weekend im feelin sorta bord and to be honnest i think im going to put these wheels on the gs.. and i just realized to be honnest and not to down anyone but i just realized there are so many people on this fourm that are willing to help people.. and a year later i actually met some of these people like poyet (who are ridiculouly nice and are willing to help) but there are a minoity that for some wierd reason pratically get off on making people feel dumb.. i thought a fourm was created to meet other enthuists who enjoy there car and a place to ask questions... well any way sorry to get off topic but this weekend i will be putting on my veilsides


the front wont look wierd because the front offsets alone will be -3

i will post up pics to show everyone how they turned out...

LEXUS_KID

iTrader: (4)

Lets get on those pic's ASAP