how do i remove the front seats from my second gen gs 300? i'm replacing the covers with new leather and i need to remove the two front seats. any help would be greatly apreciated. i remember reading somewhere about how to do this but, i couldn't find it. thanks again.

 

as far as i know the bottom part are latches so you can pull them out.

 

i really meant the front seats, sorry the rear is done. thanks josh

 

if i am correct, if you look at the rail at the bottom, there are bolts at the two ends. so there are total of 4 bolts for each seat, two on each rail. the front i think they are exposed. the rear is covered with a plastic cover. you need to carefully pry it out first. the seat should then be loose and you just need to disconnect the plugs

 

thank you very much. this is the info i wanted to confirm with at least one other person. now one additional question. the bolts on the front are actually on the rails, right? these bolts arent the one's that move when you move the seat forward and back, are they?