MN 2JZ-GE Complete Turbo Kit
#1
Driver
Thread Starter
Join Date: Oct 2010
Location: MN
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
2JZ-GE Complete Turbo Kit
Im on MY.IS (under the same name) more often.
I bought this here a few months back but with having the 5spd I can only get to about 350whp and I don't think that is enough for me . If I end up keeping my car I might just spend the 10k for a GTE swap in the future issed:.
Posting up my entire custom pieced turbo kit. It is built around an SRT 2.75 precision turbo using only high quality parts. I will list every part below and those with an * will indicate BRAND NEW. At this time I am ONLY selling as a whole kit PACKAGE deal NO PARTOUT. If I have not gotten a decent REASONABLE offer by then I will begin selling parts individually.
You will still need an EMS to get this running. Either a piggy back or Stand Alone.
Package price $3200 OR BEST OFFER SHIPPED & PAYPALLED to your door.
Parts included:
-SRT 2.75 Precision turbo, black jet coated compressor housing, .70 A/R cold side, .68 A/R hot side with journal bearings, 3" v-band
-Akimoto Front mount intercooler with full piping kit, couplers and clamps, Custom brackets, NO BUMPER CUT NEEDED
*-Denso 460cc injectors, bench tested, flow matched and rebuilt PLUG AND PLAY*
*-TIAL Q BOV with flange*
-TIAL 44mm Wastegate 9psi spring
-TurboXS Boost Controller
-SSR catch can
-Innovate LC1 Wideband
-StriX Boost and oil Temp gauges
-Custom center console gauge pod
*-XPW turbine blanket for turbo8
*-50’x2” exhaust/header wrap with ss ties for DP/Manifold8
*-T304 Stainless Steel Exhaust Manifold8
*-3" Mandrel bent T304 SS race downpipe8
*-Intake with filter*
-4an feed line with OP tee and fittings/flanges
-10an return line with fittings/flanges AND Aeroquip firesleeve
-10an/threaded oil return block insert for aluminum boss on block
I bought this here a few months back but with having the 5spd I can only get to about 350whp and I don't think that is enough for me . If I end up keeping my car I might just spend the 10k for a GTE swap in the future issed:.
Posting up my entire custom pieced turbo kit. It is built around an SRT 2.75 precision turbo using only high quality parts. I will list every part below and those with an * will indicate BRAND NEW. At this time I am ONLY selling as a whole kit PACKAGE deal NO PARTOUT. If I have not gotten a decent REASONABLE offer by then I will begin selling parts individually.
You will still need an EMS to get this running. Either a piggy back or Stand Alone.
Package price $3200 OR BEST OFFER SHIPPED & PAYPALLED to your door.
Parts included:
-SRT 2.75 Precision turbo, black jet coated compressor housing, .70 A/R cold side, .68 A/R hot side with journal bearings, 3" v-band
-Akimoto Front mount intercooler with full piping kit, couplers and clamps, Custom brackets, NO BUMPER CUT NEEDED
*-Denso 460cc injectors, bench tested, flow matched and rebuilt PLUG AND PLAY*
*-TIAL Q BOV with flange*
-TIAL 44mm Wastegate 9psi spring
-TurboXS Boost Controller
-SSR catch can
-Innovate LC1 Wideband
-StriX Boost and oil Temp gauges
-Custom center console gauge pod
*-XPW turbine blanket for turbo8
*-50’x2” exhaust/header wrap with ss ties for DP/Manifold8
*-T304 Stainless Steel Exhaust Manifold8
*-3" Mandrel bent T304 SS race downpipe8
*-Intake with filter*
-4an feed line with OP tee and fittings/flanges
-10an return line with fittings/flanges AND Aeroquip firesleeve
-10an/threaded oil return block insert for aluminum boss on block
Last edited by ISNINE; 06-13-11 at 04:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post
vindedreal
1Gen GS300 Classifieds (91-97)
16
01-18-10 05:26 PM
seeya
SC400 / 300 Classifieds
20
11-27-05 05:18 AM