FS: 475wHP 99 Eclipse Show & Go
I have a 99 Mitsu Eclipse GST Show & Go that I need to let go of.....Im open to all options even a trade. Here are the mods...
6 Bolt Block, Turbonetics T3/T4 50 Trim Stage III Ball Bearing Turbo, Turbonetics Tubular Exhaust Manifold, Tial 38mm External Wastegate, Greddy Type-S BOV, Magnus Intake Manifold, AEM Cam Gears, Injen Intake, Greddy Big FMIC, Greddy UICP, Denso 660cc Injectors, Walbro 255lph Fuel Pump, B&M FPR, AEM Fuel Rail, Greddy Evo Cat-Back, RRE 3" Down Pipe & Test Pipe, ACT 2600 Clutch, Fidanza Aluminum Flywheel, Quaife LSD, Fluidyne Radiator, B&M Short Shifter, DSMLink V2 Programable ECU, Wiseco 9:1 Compression Pistons , Eagle Rods, HKS 264/272 Cams, Crower Titanium Valve Springs & Retainers, ARP Main Sttuds, ARP Head Studs, Balance Shaft Removed, Greddy 60mm Boost/EGT, Autometer Oil Pressure & Air Fuel Gauges, Manual Boost Controller, Tein Flex W/Pillowball Mounts, Matrix F & R Strut Bars, 19" RacingHart CR MultiPiece wrapped with Yokohama ParadaSpec2's
Carbon Fiber A Pillars
Carbon Fiber Door Sills
Carbon Fiber Wing
Wings West Aggressor Front Bumper (Urethane)
Vader Side Skirts
Blitz Rear
Sparco Torino Seats
Sparco Color 2 Steering Wheel
Sparco Shift ****
Sparco Race Pedals
Pioneer AVH-P6500 DVD 6.5" Flip Out Screen
Pioneer AVIC-80 Navigation
Soundstream Kappa 6.5" Component Set Front
Infinity Kappa 6x9's
2 Soundstream Rubicon 10" Subs
2 Rockford Fosgate Amps
Monster Digital Capacitor
Monster Cables
Dynamat in Entire Car
Lambo Door Kit
Projector Headlights with Halo Eyes
MORE PICS OF THE CAR
HOME PAGE
Ive invested over 35K into the car. It pulls very hard. If you know anything about cars and mods then you know that this is one expesive car, but that said, whenever we take on these projects in the end we know we are going to take a loss. Im looking to get something in the 20K range or even a trade. Please do not insult me and low ball it.
Thanks!
6 Bolt Block, Turbonetics T3/T4 50 Trim Stage III Ball Bearing Turbo, Turbonetics Tubular Exhaust Manifold, Tial 38mm External Wastegate, Greddy Type-S BOV, Magnus Intake Manifold, AEM Cam Gears, Injen Intake, Greddy Big FMIC, Greddy UICP, Denso 660cc Injectors, Walbro 255lph Fuel Pump, B&M FPR, AEM Fuel Rail, Greddy Evo Cat-Back, RRE 3" Down Pipe & Test Pipe, ACT 2600 Clutch, Fidanza Aluminum Flywheel, Quaife LSD, Fluidyne Radiator, B&M Short Shifter, DSMLink V2 Programable ECU, Wiseco 9:1 Compression Pistons , Eagle Rods, HKS 264/272 Cams, Crower Titanium Valve Springs & Retainers, ARP Main Sttuds, ARP Head Studs, Balance Shaft Removed, Greddy 60mm Boost/EGT, Autometer Oil Pressure & Air Fuel Gauges, Manual Boost Controller, Tein Flex W/Pillowball Mounts, Matrix F & R Strut Bars, 19" RacingHart CR MultiPiece wrapped with Yokohama ParadaSpec2's
Carbon Fiber A Pillars
Carbon Fiber Door Sills
Carbon Fiber Wing
Wings West Aggressor Front Bumper (Urethane)
Vader Side Skirts
Blitz Rear
Sparco Torino Seats
Sparco Color 2 Steering Wheel
Sparco Shift ****
Sparco Race Pedals
Pioneer AVH-P6500 DVD 6.5" Flip Out Screen
Pioneer AVIC-80 Navigation
Soundstream Kappa 6.5" Component Set Front
Infinity Kappa 6x9's
2 Soundstream Rubicon 10" Subs
2 Rockford Fosgate Amps
Monster Digital Capacitor
Monster Cables
Dynamat in Entire Car
Lambo Door Kit
Projector Headlights with Halo Eyes
MORE PICS OF THE CAR
HOME PAGE
Ive invested over 35K into the car. It pulls very hard. If you know anything about cars and mods then you know that this is one expesive car, but that said, whenever we take on these projects in the end we know we are going to take a loss. Im looking to get something in the 20K range or even a trade. Please do not insult me and low ball it.
Thanks!
Last edited by melymel96; Oct 8, 2004 at 02:13 PM.
Thread
Thread Starter
Forum
Replies
Last Post







