Notices
Florida Lexus Club The place for Florida Lexus enthusiasts

key fob ??

Thread Tools
 
Search this Thread
 
Old Nov 2, 2013 | 07:17 PM
  #1  
mrloverde's Avatar
mrloverde
Thread Starter
Driver School Candidate
 
Joined: Nov 2013
Posts: 49
Likes: 0
From: florida
Question key fob ??

ok i just got my 01 is3 and i only have thefactory key with out the keyless, i seen the ones on ebay uncut with the fab built in. can i still have it programmed?
Reply
Old Nov 3, 2013 | 06:31 AM
  #2  
Dew23's Avatar
Dew23
Lexus Champion
20 Year Member
Photogenic
Photoriffic
Liked
iTrader: (1)
 
Joined: Feb 2002
Posts: 1,734
Likes: 0
From: Florida
Default

https://www.clublexus.com/forums/is-...ith-is300.html
Reply
Old Nov 7, 2013 | 04:39 PM
  #3  
mrloverde's Avatar
mrloverde
Thread Starter
Driver School Candidate
 
Joined: Nov 2013
Posts: 49
Likes: 0
From: florida
Default

well that sucks...
Reply
Old Nov 9, 2013 | 03:33 PM
  #4  
lexusis305's Avatar
lexusis305
Lead Lap
iTrader: (2)
 
Joined: Sep 2010
Posts: 723
Likes: 3
From: miami,fl
Default

You have to reprogram if its not a master key
Reply
Old Nov 9, 2013 | 07:44 PM
  #5  
mrloverde's Avatar
mrloverde
Thread Starter
Driver School Candidate
 
Joined: Nov 2013
Posts: 49
Likes: 0
From: florida
Default

how can i tell if its a master key? the key is black with no remote
Reply
Old Nov 18, 2013 | 06:33 PM
  #6  
artwo's Avatar
artwo
Driver School Candidate
iTrader: (2)
 
Joined: Feb 2010
Posts: 27
Likes: 0
From: FL
Default

I have a 01 GS and I only got the key with no bottoms when I bought it. I went to the Lexus dealer @ P Pines they told me it would be 1000.00 to 2000.00 because I needed a new computer. So I just got the key code to get a new key cut from them and got a fob from one of the guys here on CL for 10.00. On Ebay you can buy the keys cheap.

http://www.ebay.com/itm/UPGRADE-your-LEXUS-3-BUTTON-REMOTE-KEYS-to-our-NEW-SWITCHBLADE-FLIP-KEY-CASE-/151168221369?pt=Motors_Car_Truck_Parts_Accessories&fits=Year%3A2001%7CModel%3AGS300&hash=item23325400b9&vxp=mtr

Lexus key programming
Wireless

1- all doors closed and locked except drivers door (open and unlocked)
2- place key in ignition turn it to on and off
3- cycle the manual door lock from unlock to lock 5 times
4- closed the driver side door and open the driver side door
5- perform step 3.
6- place key in ignition and turn it on to off (one time to add a key) on and off two times ( rewrite ) pull key out of ignition, the door lock should response by going to lock and unlock( one time to add key) lock and unlock two times for rewrite mode.
7- Push lock and unlock bottom on key together for 1 second and push unlock one time.

If procedure is performed correctly the door lock will lock then unlock and alarm beeper will sound.

Immobilizer

1- start car and stop car. Remove key from ignition cylinder.
2- Place registered master key in ignition do not turn on.
3- Push gas pedal 5 times
4- push brake pedal 6 times
5- take out registered master key from ignition.
6- Place new key in ignition. Do not turn on
7- push gas pedal one time.
8- wait 60 seconds, the factory security indicator should go off then the key is programmed.

The immobilizer section will only work if you have a registered "Master key" if you only have a valet then it will not work unless the valet was registered to be a master key
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RSpi
ES - 1st to 6th Gen (1990-2018)
5
Oct 15, 2012 06:23 PM
MrBruin09
RX - 2nd Gen (2004-2009)
1
Jul 23, 2012 10:57 AM
ebxgsxr
GS - 2nd Gen (1998-2005)
2
Jan 5, 2012 07:24 AM
rayy117
IS - 1st Gen (2001-2005)
24
Dec 9, 2010 06:36 PM
humanoid
GS - 2nd Gen (1998-2005)
4
Feb 14, 2010 08:35 AM




All times are GMT -7. The time now is 03:28 AM.