Trunk Lid Doesn't Release from Remote
 

Since we owned a 2015 ESh for about 4 & 1/2 years, I still follow discussions over in that subforum. There was an interesting discussion about the trunk lid, specifically how far it would raise when the remote button was pressed. It was pointed out that the spoiler on those vehicles equipped with one have more weight and consequently the trunk lid just barely bumps up when the button (on the trunk or the remote) is pressed, rather than springing completely open. A helpful post (#7) was provided by mcomer regarding the ability to adjust the trunk spring tension, which is why I am sharing the link below on the assumption that it will be the same for the 7th gen cars.

https://www.clublexus.com/forums/es-...k-release.html

With that said, the trunk lid on our 2019 ESh doesn't even respond when I press the "Hold" button on our remote control. I verified the position of the button in the glove box (tried it both ways just to make sure) but still no luck. Anyone have any ideas beyond a visit to the dealership? It's not a huge deal for me or my wife as we usually just walk up to the trunk and press the button anyway (with the key in a pocket or gym bag of course).

The trunk lid on my 2020 pops fully open when I press the dash or fob button.

I don't know whether it is the same for the Generation 7 ES, but the discussion on the Generation 6 ES board related to cars without the power trunk opener option. For cars equipped with the power trunk opener, opening the trunk with the button inside the car does open the trunk all the way.

For purposes of this thread and assuming that the power trunk opener is still an option with the 2019 and 2020 ES, it might be useful if those who posted stated whether they have the power trunk opener or not.

Same for me.

Check the list of personalized settings. There may be a setting for how trunk lock responds to remote. Some models have this setting option.

There's a dealer settable setting on opening the trunk. See item 26 in the Lexus Personalized Settings pdf for the 2019 Lexus ES 300h. There's one option to turn off electronic key operation.

That's exactly what I'm talking about. It may be set to off.

THANK YOU! That answered the issue and I just didn’t realize the trunk release on this new generation had all those options. The default option was to press and hold for .8 seconds, rather than an immediate release like the 2015. I feel a little foolish now but the question has been answered. Thanks again.

Oh, and for the record, it also pops all the way open, although at a leisurely pace so “pops” may not be the most accurate phrase here. The point is opens all the way in about 4 seconds.

my trunk lid doesnt pop all the way open, anyone knows how to fix it? its a non-electric one.

See post #7 in this thread. I haven't tried it yet, but will likely try and get to that today.
https://www.clublexus.com/forums/es-...k-release.html

nice, thanks

Does anyone know if a car with the power trunk option can close the trunk from the inside dash switch? So far on my car, the button opens but won’t close the trunk.

No, don't close automatically like it opens... A disappointment. Son just bought a new Mazda CX30 and you can open AND close by inside button...

That seems really odd. Is there any chance you have to hold it for a few seconds to close it? I only ask because our NX requires you hold it for several seconds and then there is a beep and the car lights flash before the rear hatch closes. I suppose this is for safety reasons? Anyway, it just seems odd/disappointing that the power trunk is only “powered” in one direction.

You may have a point there Doug. I'll go out and give it a shot and try holding the button. Report to follow...