2013 ES300h Self-Leveling Headlights question
Thread Starter
7th Gear
Joined: Nov 2021
Posts: 7
Likes: 0
From: WA
Did a bit more digging (OK, a lot of digging). 1) If you have HID low beams they will be protected inside a plastic "can" that has a white cover on the back side and the electrical connector to the bulb will be "out of sight". If you have halogen then the electrical connector will be obvious. 2) if You don't have HID then you won't have auto-levelling. 3) If you have auto-levelling then there will be a 7.5A fuse in the fuse box in slot #9 above the driver's left foot area (at least on the 2014...consult your manual for your year model). 4) If you have auto-levelling then you should see the drive motor and control system on the back of the headlight fixture in between the high and low beam locations. 5) If you have auto-levelling then you'll find this little linkage on the right, rear control arm. The linkage will connect to a small sensor up in a boxed area of the frame. I don't think my auto-levelling system is working...probably the sensor switch needs replacing (not a big deal since I never carry really heavy loads in the car). If you have LED then 
Thank you!!
Closed
Thread
Thread Starter
Forum
Replies
Last Post
