how to remove trim under the glove compartment ?
#1
Lead Lap
Thread Starter
how to remove trim under the glove compartment ?
I notice that the bottom trim under the glove compartment has a little of play. I tried to pull the trim but before going with brute force, it is better to ask first.
One other reason that i need that piece remove so can remove the heater motor off since i dropped a little piece of plastic while changing the cabin filter in the duct and i want to retrieve it.
thank you in advance for your help.
One other reason that i need that piece remove so can remove the heater motor off since i dropped a little piece of plastic while changing the cabin filter in the duct and i want to retrieve it.
thank you in advance for your help.
#2
Lead Lap
Thread Starter
Anybody, It seems that it has 4 clips for the bottom trim under the glove compartment according to the IS forum, but we have to yank hard the trim off, something i want to make sure before doing anything with brute force.
#4
Lead Lap
Thread Starter
To help you out, i've found the diagram for it, there is 4 clips, i will post the pictures soon.
https://www.clublexus.com/forums/es3...-lighting.html
look at point no.9 and 10
https://www.clublexus.com/forums/es3...-lighting.html
look at point no.9 and 10
Last edited by Blueshark; 01-25-11 at 08:58 PM.
#5
Driver School Candidate
Hold up....
Just stumbled on this thread from a web search...
I'm sure you've fixed this by now , but for others looking to replace blower motor:
10 min job.
- Reach under glovebox area. Grab kick panel under dash. Pull hard down.
- unclip footwell light
- unclip blower motor wire
- remove (3) blower motor screws. Blower falls out
Drink a beer and done. I could do it in 90 seconds next time.
I'm sure you've fixed this by now , but for others looking to replace blower motor:
10 min job.
- Reach under glovebox area. Grab kick panel under dash. Pull hard down.
- unclip footwell light
- unclip blower motor wire
- remove (3) blower motor screws. Blower falls out
Drink a beer and done. I could do it in 90 seconds next time.
The following users liked this post:
ReeRee7482 (08-23-18)
Thread
Thread Starter
Forum
Replies
Last Post