On a 97 es, thanks

 

Philips screw above each corner light. Remove.

Exposes two bolts on the side, lift up front rad support cover (pry gently as they are clips. Exposes top bolt.

Should be 10mm for all three. Slide forward, remove bulb clips

 

Total of 4 bolts each side?

 

No, should be 2 on each Headlight

 

1. Remove the black plastic shield above the headlights.
2. Remove the corner lenses. There is a Phillips head screw at the top. Then just slide the lens forward.
3. Headlights are held in with 1 bolt at the top and two nuts on the side.

 

Thank you fellas