Notices
ES - 1st to 6th Gen (1990-2018) Forum for all 1990 - 2018 ES Models

windows seals

Thread Tools
 
Search this Thread
 
Old Dec 14, 2007 | 06:25 PM
  #1  
rembo's Avatar
rembo
Thread Starter
Rookie
 
Joined: Apr 2007
Posts: 71
Likes: 0
From: qc
Default windows seals

well we have frameless windows, its pretty cool and good looking but on my 97 i found the pass to weeks when i wash my car that water can get into the car specially in the big back windows......( i think the water is coming from the rear windows and with the angle on the watergun they get at the rear)

Thanks alot again CL
Reply
Old Dec 15, 2007 | 10:15 AM
  #2  
happy_es3's Avatar
happy_es3
Driver
 
Joined: Jul 2007
Posts: 139
Likes: 0
From: Toronto
Default

mine freeze sometimes its such a pain in the ***
Reply
Old Dec 16, 2007 | 01:07 AM
  #3  
tuan92129's Avatar
tuan92129
Lexus Champion
 
Joined: May 2006
Posts: 2,819
Likes: 1
From: CA
Default

Hahaha, Not for cold climates
Its nice and sunny here in CA, at a cool 70 degrees
-Opens window-
There shouldn't be any water going through the seals, check to see if there is an alignment issue, the rear window should close evenly in relation to the door frame. Sometimes the rubber seals get soft with age, and so you could try using some foam door/window strips to push the rubber seals out.
Reply
Old Dec 16, 2007 | 06:22 PM
  #4  
vassey50's Avatar
vassey50
Pole Position
 
Joined: Mar 2006
Posts: 283
Likes: 1
From: NS, Canada
Default

...plus don't hold the washer too close to the windows, those washers will get in any window at high pressure. I keep all of my seals in tip top shape but if i go to the coin wash, and hold the stream too close...water all over!

V
Reply
Old Dec 16, 2007 | 06:47 PM
  #5  
TORTOISE's Avatar
TORTOISE
Lead Lap
 
Joined: Aug 2007
Posts: 424
Likes: 0
From: South JerZ
Default

I dont have any problems with water gettin in but at speeds 50+ the wind noise coming in through them is just plain annoying.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TerrySaur
RC - 1st Gen (2015-present)
19
Feb 14, 2022 03:51 PM
fortitude
ES - 1st to 6th Gen (1990-2018)
10
Dec 1, 2018 07:20 PM
jcochong37
GS - 4th Gen (2013-2020)
18
Jul 29, 2015 05:25 PM
jay631987
IS - 3rd Gen (2014-present)
2
Mar 14, 2014 10:05 AM
sab504
IS - 2nd Gen (2006-2013)
1
Jul 16, 2006 05:35 PM




All times are GMT -7. The time now is 07:20 PM.