Anyone know how to test the ABS sensors on a 94 ES300? After installing new axles the light stays on-cleaned the little rascals but still not fixed. I thought sensors had two wires and you could check continuity but these look like it's a vacuum hose or something. --thanks to ANYBODY!

 

The axles have abs rings right? There should be 48 teeth. Its possible a sensor god damaged or a ring got smashed when the axles were being changed. Check for that and for broken wires. I dont know about the vacuum hose thing; all the sensor has is 2 wires and the connector. Unplug it and check the resistance. Should be .9-1.3 ohms for the front.

 

Ok -thanks a lot!