ES - 1st to 4th Gen (1990-2006) Forum for all 1990 - 2006 ES300 and ES330 models. ES250 topics go here as well.

2000 ES300 Knock Sensors Replaced, Running Rough, Multiple Codes, Troubleshooting

Thread Tools
 
Search this Thread
 
Old 08-24-16, 06:46 PM
  #16  
Hayk
Lead Lap
iTrader: (1)
 
Hayk's Avatar
 
Join Date: Feb 2009
Location: NJ
Posts: 4,101
Received 291 Likes on 230 Posts
Default

The rear brake light will only light up when the brake pedal is depressed.

Take a picture of the rear end with the lights on and post it here. There are some lights you may not know exist.
Old 08-24-16, 07:31 PM
  #17  
80es300
Pit Crew
 
80es300's Avatar
 
Join Date: Aug 2009
Location: TX
Posts: 236
Received 24 Likes on 21 Posts
Default

Originally Posted by tony2000LE
I usually have the lights set to auto, but I did turn it to the ON position to check the rear lights, and they all seem to be working? The wiring harness in the trunk looks in good shape. Is the high tail light constant with the lights in the ON position, or does the brake need to be applied for it to light up? Thx, T
If the warning light comes ON when headlights are turned ON, then it is tail light issue and not brake light issue. It appears that is true in your case. Then the high mounted brake light is not the issue. As shown in your manual (pg 230), it is either bulb 7 or 8
Old 08-25-16, 05:42 AM
  #18  
tony2000LE
Driver School Candidate
Thread Starter
 
tony2000LE's Avatar
 
Join Date: Aug 2016
Location: MN
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

These are a couple Pics with lights in the ON position. The sun was starting to come up when I took these, so I hope they are visable enough to make it out. T
Thx again guys for all the help with this. T

Old 08-25-16, 06:18 AM
  #19  
mmatheny
Lexus Test Driver
 
mmatheny's Avatar
 
Join Date: Mar 2009
Location: Dickinson, Texas
Posts: 865
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by MrBooby
The rear brake light will only light up when the brake pedal is depressed.

Take a picture of the rear end with the lights on and post it here. There are some lights you may not know exist.
My '02 had the light out indicator and it was the high brake light. Seems once you hit the brake and it doesn't light up, it sets it as bad from that point on whether you are hitting the brake or not.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TonyK419
ES - 1st to 4th Gen (1990-2006)
0
06-23-19 09:00 PM
JazzyQuinn
ES - 1st to 4th Gen (1990-2006)
17
10-31-14 08:00 PM
Rich8692
ES - 1st to 4th Gen (1990-2006)
16
08-21-13 09:21 AM
deziking
ES - 1st to 4th Gen (1990-2006)
6
11-05-10 01:03 AM
tieu
ES - 1st to 4th Gen (1990-2006)
6
10-19-08 08:05 PM



Quick Reply: 2000 ES300 Knock Sensors Replaced, Running Rough, Multiple Codes, Troubleshooting



All times are GMT -7. The time now is 06:01 PM.