Plate screws removal
 

Okay! Prev Owner had plastic screwes fixed for plates and when he sold it to me he couldn't take of plastic screws and ripped of plate from screws. Now I can't fix new plates in as both holes have left over plastic screws. Is there any easy way to remove stuck plastic screws ?

Idea/help would be appreciated. Thx

use a small "easy out",

or

heat the tip of a small screw driver so that you can melt a slot in the plastic that is left in the hole.
Let the slot reharden and then gently ease the remains out of the hole with the same screwdriver.

steviej

Thx steve, thats what in my mind ( heat and remove with sharp screw driver).

That didn't work as those screws that were struck are fibre ones not plastic ones, needs lot hig temperatyure than i thought. Any other idea ??

back them out with an "easy out" just like you would a metal screw that has broken off.

Sears makes a product for this exact call.

you could try drilling them out with a drill smaller than the inside diameter of the threads, but then you have the thread material to remove.

steviej