A few mods
#1
Driver
Thread Starter
Join Date: Jan 2013
Location: Ontario
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
A few mods
Hey everyone,
So after buying my 2013 CT a couple years now, I have done a few minor cosmetic modifications. Thought I'd share a few recently snapped pictures. Hope you enjoy them.
PS. There's nothing here that someone else hasn't done before.
So after buying my 2013 CT a couple years now, I have done a few minor cosmetic modifications. Thought I'd share a few recently snapped pictures. Hope you enjoy them.
PS. There's nothing here that someone else hasn't done before.
Last edited by LoveCT; 11-12-14 at 11:17 AM.
#4
Driver
Thread Starter
Join Date: Jan 2013
Location: Ontario
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Yes, I replaced the fog light housing to LEXUS OEM. Actually they are better value when compared to LED bulbs.
From front to back here are the modifications/enhancements that I have done so far:
1. 2014 F-Sport front bumper and 2014 LEXUS LED fog lamps
2. Smoked front license plate cover, and no holes front bumper
3. 2nd Gen. LED low beams
4. 3M Ventureshield wrap on bumper, 3/4 hood, mirrors, lights, and door handles
5. LED bulbs on mirror puddle lamps, interior, reverse brake lights and license plate lights (only halogens that remain are the turn lights and high beams)
6. FormulaOne Pinnacle Series Ceramic tint on windows and rear hatch (40%)
7. 3M gloss black wrap on roof and antenna base
8. Stubby carbon fiber look antenna
9. Momo Next 17 inch wheels
10. Aluminium dash trim
11. Door edge guards
12. JDM style stick-on/clip-on window visors
As I mentioned before, there's nothing here that someone else hasn't done before me. Thanks to everyone, who inspired me to do the small little modifications to an already awesome car. I think I will give further modifications a rest, well until someone comes up with something tickles the bug once again
From front to back here are the modifications/enhancements that I have done so far:
1. 2014 F-Sport front bumper and 2014 LEXUS LED fog lamps
2. Smoked front license plate cover, and no holes front bumper
3. 2nd Gen. LED low beams
4. 3M Ventureshield wrap on bumper, 3/4 hood, mirrors, lights, and door handles
5. LED bulbs on mirror puddle lamps, interior, reverse brake lights and license plate lights (only halogens that remain are the turn lights and high beams)
6. FormulaOne Pinnacle Series Ceramic tint on windows and rear hatch (40%)
7. 3M gloss black wrap on roof and antenna base
8. Stubby carbon fiber look antenna
9. Momo Next 17 inch wheels
10. Aluminium dash trim
11. Door edge guards
12. JDM style stick-on/clip-on window visors
As I mentioned before, there's nothing here that someone else hasn't done before me. Thanks to everyone, who inspired me to do the small little modifications to an already awesome car. I think I will give further modifications a rest, well until someone comes up with something tickles the bug once again
Last edited by LoveCT; 11-13-14 at 06:34 AM.
#7
Driver
Thread Starter
Join Date: Jan 2013
Location: Ontario
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Yeah no kidding, how did I miss that? I know you've been a crusader for the perfect lumen license plate bulbs. I tried with a few makes and settled for a regular 5 smd W5W, if you wondered.
Last edited by LoveCT; 11-13-14 at 06:34 AM.
Trending Topics
#9
Driver
Thread Starter
Join Date: Jan 2013
Location: Ontario
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
It goes straight in, no modifications required. All you need is patience. Some parts are carried over from your original bumper to the new one, like the Lexus emblem, the rubber weatherstripping at the top of the bumper, the fog light wiring, and the fog lights (if you are not buying the LED fog lights). Although Sewell Lexus paints your bumper in the package, you should ask them to send you unpainted bumper. They could not properly match my Starfire Pearl paint. I ended up getting it repainted at my local paint shop. You save money going through local paint shop, and get a better end product.
#11
Driver
Thread Starter
Join Date: Jan 2013
Location: Ontario
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
#13
Driver
Thread Starter
Join Date: Jan 2013
Location: Ontario
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
This is what I got from Sewell Parts: http://lexus.sewellparts.com/accesso...2013/5099.html
#14
Driver School Candidate
The door edge guards are the same exact color as the body panel. I know it's difficult to see them in the pictures; but for example, zoom the last picture. Run your eyes along the door panel on the front passenger side. You'll notice a slight impression at the door edge near but above the horizontal body line. That's the impression of the door edge on the front passenger side. Now run your eyes horizontally to where the rear door edge is. You'll notice a very faint impression as well.
This is what I got from Sewell Parts: http://lexus.sewellparts.com/accesso...2013/5099.html
This is what I got from Sewell Parts: http://lexus.sewellparts.com/accesso...2013/5099.html
Delivery for me isn't until the 23rd So anxious! But your CT is very crisp looking and gives me ideas. I may message you about bulbs, etc.
#15
Driver
Thread Starter
Join Date: Jan 2013
Location: Ontario
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Now if you are looking into LED's for the interior lamps, this thread from another forum will give you an excellent starting point. http://www.ct200hforum.com/forum/lex...ed-lights.html