Official "MODDED" CT200h picture thread!
#421
Lead Lap
2015 base
Fire Agate Pearl
Bc racing coils
14k fronts // 12k rears
Megan rear camber arms cut and welded to manipulate more degrees of camber
Fenders rolled and pulled to fit my Work Vsxx
Front: 18x9 +15 205/40/18
Rear: 18x10.5 +5 225/40/18
Junction Produce neck cushions
Vip tables being built by me (taking forever)
Curtains being made by me (taking forever)
Fire Agate Pearl
Bc racing coils
14k fronts // 12k rears
Megan rear camber arms cut and welded to manipulate more degrees of camber
Fenders rolled and pulled to fit my Work Vsxx
Front: 18x9 +15 205/40/18
Rear: 18x10.5 +5 225/40/18
Junction Produce neck cushions
Vip tables being built by me (taking forever)
Curtains being made by me (taking forever)
#422
I installed Kenwood XR-1800P in the front. Kenwood XR1800 in the rears
Fronts are 7" component round speakers with a 1 inch tweeter, rears are a 7" coaxial
I suggest NOT doing the heavy stinger road kill. Suggest doing SOme High Quality SoundSkin dampening material. a 11squart ft roll is 6#
I would apply the material on the COMPLETE outer door skin. then COMPLETE inner door skin and then one more layer on the door panel itself.
Then do the floors and hatch area. I have 88sq ft in my car. super quiet.
This brand of material is ultra lightweight, moisture resistant(does not absorb water, if the product does it will get moldy), super easy to work with.
Highly recommend this, i have used everything else on the market. Blackmore, NVX, Hushmat, dynamat, stinger, Focal, xmat, etc. this stuff is so good you'll never want to use anything else.
I'm doing the following setup for audio.
Kenwood DNX 893S headunit
Kenwood XR1800P fronts
Kenwood Xr1800 rears
Kenwood XR900.5 5 channel amp
JL Audio TW1 ten in sub in the floor on left side
Idatalink Maestro RR interface device
#423
Driver School Candidate
Join Date: Feb 2017
Location: California
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
#424
2014 CT200h F-Sport
-I wasn't planning on getting it redline red, I wanted silver or white, but I love this color now. It makes it look more aggressive and draws attention
This is my ct bought about a month ago. Only mods so far are LED headlights (6500k) and fog lights (3000k) (will post soon)
-future mods are window visors/deflectors and that's probably it for the moment.
-I wasn't planning on getting it redline red, I wanted silver or white, but I love this color now. It makes it look more aggressive and draws attention
This is my ct bought about a month ago. Only mods so far are LED headlights (6500k) and fog lights (3000k) (will post soon)
-future mods are window visors/deflectors and that's probably it for the moment.
Last edited by Miamiboy87; 03-20-17 at 11:55 AM.
#426
Driver School Candidate
2016 ct200h f sport
hello everyone just wanted to share my ct. nothing fancy
Exterior:
-16 F sport
-f1r wheels
-bc racing coilovers
-gloss carbon wrapped top of trunk only
-HID headlight/foglights 5k
-window deflector from Wells Visors
Interior:
-vinyl wrapped trim to kelly green (will change it to gloss carbon soon)
-aftermarket gear ****
Exterior:
-16 F sport
-f1r wheels
-bc racing coilovers
-gloss carbon wrapped top of trunk only
-HID headlight/foglights 5k
-window deflector from Wells Visors
Interior:
-vinyl wrapped trim to kelly green (will change it to gloss carbon soon)
-aftermarket gear ****
Last edited by deeseatea; 04-06-17 at 10:54 AM.
The following users liked this post:
Jluciiiano (09-11-19)
#427
Nice ride.. what size rims are those? I also thought about getting that shift **** lol. Do you have a DIY on how you did the wrap to the trunk and a link to where you got it at?
#428
Driver School Candidate
http://www.metrorestyling.com/SearchResults.asp?searching=Y&sort=7&search=Gloss+carbon&show=32&page=1&cat=354457
#430
Driver School Candidate
#431
#432
Driver School Candidate
#433
Driver School Candidate
Hi Everyone,
I've been a long time lurker here, and now I thought I should probably show myself. I bought my '15 CT F-Sport two years ago new from the dealer, and during these two years I've done a couple of mods:
Injen Intake
HKS Exhaust
F-Sport Sway bars
BC BR Coilovers
AG M240 18" Wheels (Temporary until my Work VS-XXs come in)
Modellista Front Lip Spoiler & Side Skirts
TRD Rear Bumper Diffuser
I also have the StanceParts Front Air Cup Suspension Kit, but never had the chance to install it yet.
I've also added some little touches like the OEM sun visors, clean box, cup holder plates, and rear cupholders. All OEM.
I've been a long time lurker here, and now I thought I should probably show myself. I bought my '15 CT F-Sport two years ago new from the dealer, and during these two years I've done a couple of mods:
Injen Intake
HKS Exhaust
F-Sport Sway bars
BC BR Coilovers
AG M240 18" Wheels (Temporary until my Work VS-XXs come in)
Modellista Front Lip Spoiler & Side Skirts
TRD Rear Bumper Diffuser
I also have the StanceParts Front Air Cup Suspension Kit, but never had the chance to install it yet.
I've also added some little touches like the OEM sun visors, clean box, cup holder plates, and rear cupholders. All OEM.
The following users liked this post:
GetUrWheel (04-10-17)
#434
Driver School Candidate
@Av8or808 howzit man what island you from? your car looks nice already cant imagine when you get those works on lol. how much did it cost for that rear diffuser?
#435
Driver School Candidate
The TRD rear diffuser was about $730 through Nigel.