When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2015 base
Fire Agate Pearl
Bc racing coils
14k fronts // 12k rears
Megan rear camber arms cut and welded to manipulate more degrees of camber
Fenders rolled and pulled to fit my Work Vsxx
Front: 18x9 +15 205/40/18
Rear: 18x10.5 +5 225/40/18
Junction Produce neck cushions
Vip tables being built by me (taking forever)
Curtains being made by me (taking forever)
2015 base
Fire Agate Pearl
Bc racing coils
14k fronts // 12k rears
Megan rear camber arms cut and welded to manipulate more degrees of camber
Fenders rolled and pulled to fit my Work Vsxx
Front: 18x9 +15 205/40/18
Rear: 18x10.5 +5 225/40/18
Junction Produce neck cushions
Vip tables being built by me (taking forever)
Curtains being made by me (taking forever)
Hey flexus1, would you mind sending me or posting the specs of everything electronic you needed for replacing the speakers?
Stock size is 6x9 fronts, 6.5" rears with 2.5" front tweeters
I installed Kenwood XR-1800P in the front. Kenwood XR1800 in the rears
Fronts are 7" component round speakers with a 1 inch tweeter, rears are a 7" coaxial
I suggest NOT doing the heavy stinger road kill. Suggest doing SOme High Quality SoundSkin dampening material. a 11squart ft roll is 6#
I would apply the material on the COMPLETE outer door skin. then COMPLETE inner door skin and then one more layer on the door panel itself.
Then do the floors and hatch area. I have 88sq ft in my car. super quiet.
This brand of material is ultra lightweight, moisture resistant(does not absorb water, if the product does it will get moldy), super easy to work with.
Highly recommend this, i have used everything else on the market. Blackmore, NVX, Hushmat, dynamat, stinger, Focal, xmat, etc. this stuff is so good you'll never want to use anything else.
I'm doing the following setup for audio.
Kenwood DNX 893S headunit
Kenwood XR1800P fronts
Kenwood Xr1800 rears
Kenwood XR900.5 5 channel amp
JL Audio TW1 ten in sub in the floor on left side
Idatalink Maestro RR interface device
Thank you! Yeah they took a little coaxing to get em in there but it was pretty easy and doable. Also was pleased to see that i only took a 2mpg hit and i'm still getting around 41-42mpg (combined city/hwy)
2014 CT200h F-Sport
-I wasn't planning on getting it redline red, I wanted silver or white, but I love this color now. It makes it look more aggressive and draws attention
This is my ct bought about a month ago. Only mods so far are LED headlights (6500k) and fog lights (3000k) (will post soon)
-future mods are window visors/deflectors and that's probably it for the moment.
Last edited by Miamiboy87; Mar 20, 2017 at 11:55 AM.
hello everyone just wanted to share my ct. nothing fancy
Exterior:
-16 F sport
-f1r wheels
-bc racing coilovers
-gloss carbon wrapped top of trunk only
-HID headlight/foglights 5k
-window deflector from Wells Visors
Interior:
-vinyl wrapped trim to kelly green (will change it to gloss carbon soon)
-aftermarket gear ****
Last edited by deeseatea; Apr 6, 2017 at 10:54 AM.
Nice ride.. what size rims are those? I also thought about getting that shift **** lol. Do you have a DIY on how you did the wrap to the trunk and a link to where you got it at?
Nice ride.. what size rims are those? I also thought about getting that shift **** lol. Do you have a DIY on how you did the wrap to the trunk and a link to where you got it at?
thanks fam! Rims are 18's x 8.5. Mybad but no diy on the wrapping part. My friend did most of thhe work there and just helped him out with it. Here's the link of the vynil
http://www.metrorestyling.com/SearchResults.asp?searching=Y&sort=7&search=Gloss+carbon&show=32&page=1&cat=354457
I've been a long time lurker here, and now I thought I should probably show myself. I bought my '15 CT F-Sport two years ago new from the dealer, and during these two years I've done a couple of mods:
Injen Intake
HKS Exhaust
F-Sport Sway bars
BC BR Coilovers
AG M240 18" Wheels (Temporary until my Work VS-XXs come in)
Modellista Front Lip Spoiler & Side Skirts
TRD Rear Bumper Diffuser
I also have the StanceParts Front Air Cup Suspension Kit, but never had the chance to install it yet.
I've also added some little touches like the OEM sun visors, clean box, cup holder plates, and rear cupholders. All OEM.
@Av8or808 howzit man what island you from? your car looks nice already cant imagine when you get those works on lol. how much did it cost for that rear diffuser?
Toyota and Lexus Join Mille Miglia For The First Time
Slideshow: A five-car lineup spanning more than five decades of Toyota performance and engineering will tackle one of Italy's most celebrated automotive routes.
Very nice, some pretty aggressive wheels there!
