JLB Motorsports - 19" Staggered / Concave "Apollo Wheels" - Fits GS, IS, LS, SC, ES
#77
Former Sponsor
Thread Starter
Join Date: Sep 2009
Location: CA
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
#82
Former Sponsor
Thread Starter
Join Date: Sep 2009
Location: CA
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Same response as above. We've sent out a couple of sets for SC's, but we haven't been able to have a customer post photos yet. If you're local, stop by and we'll take photos of the wheels on your car. =)
#85
Former Sponsor
Thread Starter
Join Date: Sep 2009
Location: CA
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
The +20mm offset will require fender rolling front and rear on the IS250/IS350. The +40mm offset will not require fender rolling.
Also, if you have the AWD model, we don't really recommend using staggered wheels, although we can stagger the wheels and non-stagger the tires so that you can keep the over all diameters the same.
Also, if you have the AWD model, we don't really recommend using staggered wheels, although we can stagger the wheels and non-stagger the tires so that you can keep the over all diameters the same.
#89
Former Sponsor
Thread Starter
Join Date: Sep 2009
Location: CA
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts