Nigel JDM Parts **LED Board for your Interior & Exterior**
#49
Lexus Fanatic
iTrader: (4)
Join Date: Oct 2007
Location: Miami
Posts: 6,058
Likes: 0
Received 0 Likes
on
0 Posts
booo... might sound like a dumb ? but i already have LED's in there and the board looks like it wont fit.. how do you put it in?? the circuit board 4 the map light only has hole for the 194 bulb... do you have to pry the plastic cover from the bottom??
#52
mooncake master
iTrader: (12)
As for the fitting the LED board into the puddle lamps. It will NOT work, unless you dremel open the housing and stick the LED board in there then glue it back together. The guys in Japan has been doing this method for years.
#53
Yes you will need to pry open the plastic cover to stick the LED board in there. You have to be VERY careful, as you will damage the plastic EASILY. Use some blue tape and cover it up, it will help keep the marring to a minimum.
As for the fitting the LED board into the puddle lamps. It will NOT work, unless you dremel open the housing and stick the LED board in there then glue it back together. The guys in Japan has been doing this method for years.
As for the fitting the LED board into the puddle lamps. It will NOT work, unless you dremel open the housing and stick the LED board in there then glue it back together. The guys in Japan has been doing this method for years.
Thank You Pocky!!
#59
Driver
Join Date: Aug 2008
Location: Northern Westchester, NY
Posts: 132
Likes: 0
Received 1 Like
on
1 Post
Will these fit/work for 92-96 ES300?
LED - Mulit bulb size. It fits any Japanese and European as well as Amercian cars. (For example: Dome Light, Map Light, Foot light, Trunk light etc. etc.)
$14.99 SHIPPED
Come with 5 MULTI SOCKETS with adjustment! Led board come with 3M Double Sided Tape!! Bascially, it will fit into any car, it has all the bulb size included. Color Available: Red, Orange, Blue, White. It has pre taped one side 3M double sided tape. 1 Package = 1 led board.
--------------------------------------------------------------------------
Has anyone tried these in the 92-96 ES Series? Could 2 work for front dome like ExTrEmE99 did? But his car is pretty much brand new design vs my 96 ES300 I am thinking 2 LED board for front dome, 1 for front driver door and 1 for front passenger door. If 2 in front are as bright as ExTrEmE99's pic for the front, I will not bother with rear dome - doesn't look like it's needed.
Anyone have any experience with 92-96 generation? Suggestions always welcome. Thanks
$14.99 SHIPPED
Come with 5 MULTI SOCKETS with adjustment! Led board come with 3M Double Sided Tape!! Bascially, it will fit into any car, it has all the bulb size included. Color Available: Red, Orange, Blue, White. It has pre taped one side 3M double sided tape. 1 Package = 1 led board.
--------------------------------------------------------------------------
Has anyone tried these in the 92-96 ES Series? Could 2 work for front dome like ExTrEmE99 did? But his car is pretty much brand new design vs my 96 ES300 I am thinking 2 LED board for front dome, 1 for front driver door and 1 for front passenger door. If 2 in front are as bright as ExTrEmE99's pic for the front, I will not bother with rear dome - doesn't look like it's needed.
Anyone have any experience with 92-96 generation? Suggestions always welcome. Thanks
Last edited by LW ES300; 11-03-08 at 10:34 AM.
#60
Driver
Join Date: Aug 2008
Location: Northern Westchester, NY
Posts: 132
Likes: 0
Received 1 Like
on
1 Post
Has anyone tried these in the 92-96 ES Series? Could 2 work for front dome like ExTrEmE99 did? But his car is pretty much brand new design vs my 96 ES300 I am thinking 2 LED board for front dome, 1 for front driver door and 1 for front passenger door. If 2 in front are as bright as ExTrEmE99's pic for the front, I will not bother with rear dome - doesn't look like it's needed.
Anyone have any experience with 92-96 generation? Suggestions always welcome. Thanks
Anyone have any experience with 92-96 generation? Suggestions always welcome. Thanks