Sale FLASH SALE PTS JOEZ for LEXUS GS-F, Limited quantity. 1 week only
08-02-18, 03:46 PM
#1
FLASH SALE PTS JOEZ for LEXUS GS-F, Limited quantity. 1 week only
$400 Off Msrp
order here
http://www.modinjapan.com/pts-rcf-40107.html
1 week only or until we run out
10-15-18, 06:56 PM
#2
Driver School Candidate
Join Date: Sep 2018
Location: NA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I have a JoeZ exhaust, but only has 1 outlet. Not sure which one is it (believe series 1) as I bought with it.
Would love to get only the dual tips into this exhaust. Are they available so I can weld in?
BTW, the exhaust is awesome.
Would love to get only the dual tips into this exhaust. Are they available so I can weld in?
BTW, the exhaust is awesome.
10-18-18, 11:33 AM
#6
pipes are 2.5 inches
This is a catback system only, not axle back.
Any exhaust system for the 5.0 engine will cause back pressure, some more than others depending on the diameter of the exhaust pipes. 2.5 to 3 inches is ideal for v8. resonators and pipe designs such as x pipe, h pipe or straight through design can increase or decrease back pressure but you do need some otherwise you can lose horsepower if the exhaust flow is too much.
Trending Topics
10-19-18, 10:53 PM
#8
Lou
10-21-18, 12:17 AM
#9
First off, it's not about back pressure, it'a all about flow. And the JoeZ will flow far better than stock. You do in fact, want the "X" pipe configuration of the JoeZ and most other 3rd party systems, as well as the stock system. Do a google search and you'll see why. As regards to the pipe diameter of 2½" that is the ideal size for a 5 liter V8 dual exhaust system.
Lou
Lou
Thank you.
Note: The Greddy axle back product is the 1st product I have installed that has affected the performance of my car. I have owned so many different brand cars over the years, not once have I had my car's performance compromised from a simple muffler replacement system.
10-27-18, 10:22 PM
#11
https://www.vividracing.com/blog/ann...lips-included/
https://www.more-japan.com/blogs/201...or-lexus-gs-f/
http://www.tanabe-usa.com/touringmedalion.asp?id=7/
Tell you what, I'll make a video comparing both pipes side by side. I'll do that free of charge for everyone to benefit from. LOL
Last edited by designo; 10-28-18 at 03:25 AM.
Thread
Thread Starter
Forum
Replies
Last Post
ModInJapan
CL Vendor Products for RC-F
0
11-09-18 12:29 PM
ModInJapan
CL Vendor Products for IS-F
19
10-22-18 02:52 PM
ModInJapan
CL Vendor Products for RC-F
0
06-20-18 01:13 PM
ModInJapan
CL Vendor Products for RC-F
0
03-02-18 04:19 PM