New Product RR Racing ECU Tuning and Supercharger Development
08-22-18, 10:59 AM
Pole Position
Join Date: Oct 2009
Location: CA - DTLA/LAX
Posts: 372
Quote:
Originally Posted by
RRRacing
Looking at these numbers just brought a big smile to my face and a big frown from my wallet. lol
Are these numbers with Headers installed and any dyno runs on 91 octane?
08-22-18, 11:57 AM
Sponsor
Thread Starter
Join Date: Dec 2014
Location: Pennsylvania
Posts: 2,650
Quote:
Originally Posted by
jay90011
Looking at these numbers just brought a big smile to my face and a big frown from my wallet. lol
Are these numbers with Headers installed and any dyno runs on 91 octane?
We haven't done any dyno runs on 91, but I don't think it would be more than 10hp less.
Yes, our shop car is equipped with PPE headers and full ARK Grip exhaust.
Rafi
__________________
We Engineer Track Proven Upgrades For Your Lexus!
SUPERCHARGERS : ECU TUNING : SUSPENSION : EXHAUST : PPE MASTER DEALER
08-22-18, 03:37 PM
Sponsor
Thread Starter
Join Date: Dec 2014
Location: Pennsylvania
Posts: 2,650
100-200kph acceleration run:
__________________
We Engineer Track Proven Upgrades For Your Lexus!
SUPERCHARGERS : ECU TUNING : SUSPENSION : EXHAUST : PPE MASTER DEALER
08-22-18, 04:26 PM
Driver School Candidate
Join Date: Apr 2015
Location: California
Posts: 23
Likes: 0
Quote:
Originally Posted by
RRRacing
music to my ears !!!!!’
08-23-18, 07:46 AM
Driver
Join Date: Jul 2018
Location: VA
Posts: 157
Awesome results!
On a slightly different topic, are those 18" Enkei Raijin's on there?
08-24-18, 09:26 AM
Sponsor
Thread Starter
Join Date: Dec 2014
Location: Pennsylvania
Posts: 2,650
Quote:
Originally Posted by
cliffhokie
Awesome results!
On a slightly different topic, are those 18" Enkei Raijin's on there?
nope. 18x9.5" TSW Nurburgrings
__________________
We Engineer Track Proven Upgrades For Your Lexus!
SUPERCHARGERS : ECU TUNING : SUSPENSION : EXHAUST : PPE MASTER DEALER
08-24-18, 10:09 AM
Driver
Join Date: Jul 2018
Location: VA
Posts: 157
Quote:
Originally Posted by
RRRacing
nope. 18x9.5" TSW Nurburgrings
Are you running square without fender modifications? Offset? I'm assuming with RRRacing coilovers?
08-25-18, 02:56 AM
Driver
Join Date: May 2014
Location: Ontario
Posts: 182
Now that the 6000rpm issue is fixed. Are you able to do 7000rpm with the supercharger or is it just pushing things too much at that point?
08-25-18, 11:26 AM
Intermediate
Join Date: May 2015
Location: Ne
Posts: 422
If someone were to push their luck, what does it seem like the limit is on the stock fuel system?
08-26-18, 01:16 PM
Driver
Join Date: Dec 2016
Location: CO
Posts: 166
Quote:
Originally Posted by
RRRacing
We haven't done any dyno runs on 91, but I don't think it would be more than 10hp less.
Yes, our shop car is equipped with PPE headers and full ARK Grip exhaust.
Rafi
Will I get the same numbers on my '15 GS350 F-Sport RWD?
08-26-18, 02:56 PM
Sponsor
Thread Starter
Join Date: Dec 2014
Location: Pennsylvania
Posts: 2,650
Quote:
Originally Posted by
2004ES
Will I get the same numbers on my '15 GS350 F-Sport RWD?
yes, it’s the same engine and tranny.
Rafii
__________________
We Engineer Track Proven Upgrades For Your Lexus!
SUPERCHARGERS : ECU TUNING : SUSPENSION : EXHAUST : PPE MASTER DEALER
08-27-18, 09:17 AM
Intermediate
Join Date: Aug 2013
Location: WA
Posts: 339
Quote:
Originally Posted by
RRRacing
I would say about 10hr total install time is normal.
We have not installed or sold to a GS350 RWD customer yet.... only GS350 AWD.
Not sure by "tune will work without long wait times?"
Rafi
The tuner you guys sell - I’ve seen some people with 2017 IS350’s that bought the tune and they have to send in their ECU because of an issue.
Do you sell the tune/tuner that is updated and will work for a 2014 GS350 FSport that works perfectly with 7K redline and without RPM/Fuel cutout issues.
08-27-18, 09:32 AM
Driver
Join Date: Dec 2016
Location: CO
Posts: 166
Quote:
Originally Posted by
RRRacing
yes, it’s the same engine and tranny.
Rafii
So close. I just need my buddy to donate shop time for the install! Otherwise do you have any referrals for shops in Colorado?
08-27-18, 11:11 AM
Intermediate
Join Date: Aug 2013
Location: WA
Posts: 339
Also - any 1/4 mile time slips?
08-27-18, 11:58 AM
Sponsor
Thread Starter
Join Date: Dec 2014
Location: Pennsylvania
Posts: 2,650
Quote:
Originally Posted by
2004ES
So close. I just need my buddy to donate shop time for the install! Otherwise do you have any referrals for shops in Colorado?
yes RS we do. We have a shop that did an ISF SC install in Colorado, and did a good job. IS350 SC is easier to install.
PM me
Rafi
__________________
We Engineer Track Proven Upgrades For Your Lexus!
SUPERCHARGERS : ECU TUNING : SUSPENSION : EXHAUST : PPE MASTER DEALER