When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Made some clear turn signals and did a switchback LED mod!
I didn't mean to separate the lens from the assembly but I fixed it later.
I hate wiring so I'm glad there wasn't much I needed to do.
These should have come OEM with clears and an amber bulb.
Finished product! https://imgur.com/vmrQ4xz (go to link since site won't play mp4s from Imgur)
very nice! how did you pry apart the lenses? heat the housing first?
It was completely an accident when I was trying to separate it from the car. If you look close at the upper corner of that assembly you'll see a chunk of plastic missing that the previous owner broke and I think it separated there and as I was struggling with it I slowly pulled it apart lol. I had some FIPG from an oil pan job I did on my old Toyota Matrix lying around and sealed it with that.
This is driver's side with cylinders 7, 5, 3, 1 in that order from top to bottom.
This is passenger's side with cylinders 8, 6, 4, 2 in that order from top to bottom.
I was not pleased to see the gunky oil on some of the plugs or the orange rings on a few of them (presumably meaning oil changes not happening enough and slight overheating happening). This thing runs noticeably better, though. Gonna replace a ton of vacuum lines soon, too. The oil change was uneventful, thankfully.
Last edited by GenkiLexus; Jun 18, 2021 at 11:06 PM.