Noobierices NGP is250 build
#1
Rookie
Thread Starter
Noobierices NGP is250 build
Hey Club! its Been AWHILE! since i posted another thread about my car i just wanted to do a write up of my car!
lets start from the Beginning!
11-5-16 brought her home!
took her on a road trip down to texas and suffered massive rock chips and paint peel
so i decided to give her a face lift
if you want the link on my conversion its found on my sig or here https://www.clublexus.com/forums/is-...onversion.html
any who got her done!
a few months went by and then my wife took the car to work, sad news came when she woke me up when she got off work, she backed up into our fence yanking the bumper where it meets the fender on the passenger side =(
had to save up for a new bumper and paint again... sigh
mounted the new one on and also mounted the ikon/ebay lip
so far she has been sitting like this for two years untouched, found a new hobby to spend my money on... but decided to get back on dressing her...
lets start from the Beginning!
11-5-16 brought her home!
took her on a road trip down to texas and suffered massive rock chips and paint peel
so i decided to give her a face lift
if you want the link on my conversion its found on my sig or here https://www.clublexus.com/forums/is-...onversion.html
any who got her done!
a few months went by and then my wife took the car to work, sad news came when she woke me up when she got off work, she backed up into our fence yanking the bumper where it meets the fender on the passenger side =(
had to save up for a new bumper and paint again... sigh
mounted the new one on and also mounted the ikon/ebay lip
so far she has been sitting like this for two years untouched, found a new hobby to spend my money on... but decided to get back on dressing her...
#2
Rookie
Thread Starter
this is how she sits now!
just hit 60k on her and i took her to the lexus dealership to get the 60k maintence done but they said i didnt need it.. im like what?!!!! i also needed new tyres... so i decided to buy wheels and start modding her
bought a used set of advan RZII 18x9 +25 offset wraped in almost new nitto motivos
#3
Rookie
Thread Starter
so far as of right now i just bought some Rsr Down springs and some lugs and some hub centric rings, if im able to sell my gpu i can get my fenders rolled next week, if im not able to then im probably going to have to wait till next month to get my fenders rolled will be getting an alignment and balance also,i need to get my wheels touched up they have some scrapes on the spokes =(
#4
Rookie
Thread Starter
future plans for this car im probably just going to leave the motor stock, but im looking to get a trd rear diffuser and sideskirts, for spoilers im thinking either a bella trunk or a seibon carbon wing same for the lip planning on getting a seibon also, i also ordered some lower Rcf/Gsf Lca brushings to deal with the tyre wear
Last edited by Noobierice; 06-08-19 at 05:48 AM.
#5
Lexus Test Driver
Join Date: Feb 2017
Location: Richmond Hill, Ontario, Canada
Posts: 6,260
Received 1,732 Likes
on
1,368 Posts
Have any pics with the wheels on yet?
For the fender rolling...the rear is already factory rolled...so there's literally nothing left to roll. You would have to pull the fender if you need more room.
For the fender rolling...the rear is already factory rolled...so there's literally nothing left to roll. You would have to pull the fender if you need more room.
#6
Rookie
Thread Starter
i havent mounted the wheels yet... still waiting for my lugs to come in before i do anything, and for rolling i just wanted to roll them just in case my wheels do hit something but you saying its already rolled i feel like i dont need to, i might just end up mounting the springs in and wheels and see how it sits when i drop it
Trending Topics
#8
Your #1 Lexus Vendor
iTrader: (8)
Nice start!
-Josh
-Josh
__________________
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
The following users liked this post:
Meraki Autoworks (06-09-19)