is300 2jz-ge vvti turbo won't rev
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2019
Location: ireland
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
is300 2jz-ge vvti turbo won't rev
hi
just fitted turbo with internal wastegate set at 0.4bar, no bov, pipes from turbo to intercooler are 2inch and from intercooler to throttle body is 2.5inch, MAF sensor is between intercooler and throttle body, all o2 sensors are in. it gets to about 4000revs and that's it. run sweet up to 4k revs. any sugestions? HELP PLEASE
just fitted turbo with internal wastegate set at 0.4bar, no bov, pipes from turbo to intercooler are 2inch and from intercooler to throttle body is 2.5inch, MAF sensor is between intercooler and throttle body, all o2 sensors are in. it gets to about 4000revs and that's it. run sweet up to 4k revs. any sugestions? HELP PLEASE
#3
Pole Position
Yep, what hodgdon said. I'd also guess that you have a CEL on. I'd address anything that makes the stock ecu turn the CEL on. This car has many ways to go into limp mode.
Thread
Thread Starter
Forum
Replies
Last Post
99SC42
Build Threads
8
08-02-14 03:56 PM