When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Next parts to come are Front and rear strut tower brace. Most likely going to get the trd one because its all on piece. for the rear I will find a similar style one but if its multi piece I won't mind. This is once I have my suspension taken care of tho. Upcoming pay check is going to cover moog lbjs and poly steering rack bushings. Ill see if I can squeeze maybe front or rear adjustable end links for the sway. Really looking to build this car the right way. lol
Hows the ride with the PBM's compared to stock? As stiff as you figured they'd be?
They are pretty stiff but not stiff enough even with the swaybars corrected with figs endlinks. Im going to give them a call and go with 20k/18k. Really want this car to be stiffer than my s13.
Haven't really posted anything up on here for a koo min...
These came in the mail a while back, overall I recommend them because they correct the positioning of the sway bar.
But my ride is still not where i want it to be... Going to order trd sways once I get all my arms, Upcoming paycheck is going to be 30mm rca's with new ball joints from rockauto with some poly steering rack bushings.
Recently I ordered these babies from JP (:
Talked to a friend of mine from HIDILLUSIONZ and got some good info on my headlight retro fit upcoming.
I figured since I'm going with q45 projectors and the headlight lenses are one piece I might as well do a quad projector set-up and get it done once.
cosign on this. I believe the 300 takes 5.7qts I believe. I put 5.5qts in my GS4. Your car is coming together nicely. Do you have a link to the DIY DRL for pre-01 2GS's?