JADE - green gs300 build
05-18-14, 10:52 PM
#18
@lutkis sorry. let me clear it up. as for "maxxed out" sorry i mean that its maxxed to positive. i want this setup to be as functional as possible since it is a daily drive. i want the camber and toe to sit inside of factory specs so im not causing premature tire wear. with how low it is sitting right now, the specs are all off.
specs of wheels are 19x10 et 24 , 19x9 et 24
tires are 235 40 19 squared.
hope this cleared it up a bit.
specs of wheels are 19x10 et 24 , 19x9 et 24
tires are 235 40 19 squared.
hope this cleared it up a bit.
05-20-14, 07:03 PM
#20
Update-
Decided to run a bigger tire in the rear. im going from 135 40 19 all around to 145 40 19 in the rear. i didnt like the uneven stretch so i went bigger. looks much better now!
BEFORE:
AFTER:
and here is a picture from last weekends car meet
Decided to run a bigger tire in the rear. im going from 135 40 19 all around to 145 40 19 in the rear. i didnt like the uneven stretch so i went bigger. looks much better now!
BEFORE:
AFTER:
and here is a picture from last weekends car meet
Last edited by Grobg; 05-20-14 at 07:11 PM.
05-27-14, 12:50 AM
#23
this is the first time i've seen headlight tint that i actually like. I think it will look good once you finish all 4 headlights.
As for the wood, i think there was the red wood, a black+grey wood found mostly in SD's, and the black+blue wood which i have only seen in JDM aristos
As for the wood, i think there was the red wood, a black+grey wood found mostly in SD's, and the black+blue wood which i have only seen in JDM aristos
