DIY plasti dip rims
#1
Pole Position
Thread Starter
DIY plasti dip rims
Hello fellow enthusiasts this is just a DIY on me plasti dipping my rims black. I started bye cleaning my rims very well with chemical guys wheel and tire cleaner.
1. Clean wheels
2. Dry wheels very well
3. Use a mixture of alcohol and water 50-50 to prep wheels
4. Use a bag kitchen cut down the side place it over your rotors and calipers to cover
5. Shake can very well test spray on something to make sure it spraying good
6. Start with a very light spray let dry and keep going stopping 15 minutes in between coats I put a total of 5 coats.
1. Clean wheels
2. Dry wheels very well
3. Use a mixture of alcohol and water 50-50 to prep wheels
4. Use a bag kitchen cut down the side place it over your rotors and calipers to cover
5. Shake can very well test spray on something to make sure it spraying good
6. Start with a very light spray let dry and keep going stopping 15 minutes in between coats I put a total of 5 coats.
#3
Pole Position
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
ANCL
Automotive Care & Detailing
4
05-13-13 04:14 PM