Titoman "Snow Bunny" 3IS Build Thread

Subscribe
Oct 20, 2013 | 07:43 PM
  #46  
Quote: Can't wait to see the lips, cars looking good
Thanks, I can't wait as well.

Quote: Wow, that looks nice. All the good shops and auto detailers are in SoCal...
Thanks. They are alot of good shops here in LA

Quote: wow that looks nice. Going have to inquire about this at some local places.
Thanks.
Reply 0
Oct 20, 2013 | 07:45 PM
  #47  
Quote: From Aimgain I am only getting the REAR UNDER SPOILER TYPE 1. It comes in black already so I won't need to pain it another color. They are a little pricey but It would give the car a whole another look and stand out from the rest. Still working on a deal for the Aimgain spoiler.
What do you mean it comes in black already? Is it painted in obsidian black? Also you have UW and that rear part has little bit where you would need to paint to match your UW.
Reply 0
Oct 20, 2013 | 08:19 PM
  #48  
Quote: What do you mean it comes in black already? Is it painted in obsidian black? Also you have UW and that rear part has little bit where you would need to paint to match your UW.
I think it comes in flat black not Obsidian Black. I will find out once I get more info from the people from Aimgain.
Reply 0
Oct 20, 2013 | 08:25 PM
  #49  
Sweet ride man! Love the IS3.
Reply 0
Oct 21, 2013 | 09:57 AM
  #50  
More LED's for my "Snow Bunny"
Just installed my new LED lights for my rear turn single to Red replacing the yellow amber ones. Also installed my new LED Puddle Lights.

Thanks to Kenneth from HID Powerhouse. Once again thanks for hooking me up with more LED lights and they look great on my "Snow Bunny"

This is the package I got: FlashBolt5 Red Rear Turn Signal LEDs and a set of HFR decoder modules. TitanRR Super White Exterior Mirror Puddle LEDs

Titoman "Snow Bunny" 3IS Build Thread-photo-46-.jpg   Titoman "Snow Bunny" 3IS Build Thread-photo-45-.jpg  

Reply 0
Oct 21, 2013 | 03:41 PM
  #51  
Looks good!!!! Can't wait till you get the LEMs CF Lip installed =)
Reply 0
Oct 21, 2013 | 03:55 PM
  #52  
Quote: Just installed my new LED lights for my rear turn single to Red replacing the yellow amber ones. Also installed my new LED Puddle Lights.

Thanks to Kenneth from HID Powerhouse. Once again thanks for hooking me up with more LED lights and they look great on my "Snow Bunny"

This is the package I got: FlashBolt5 Red Rear Turn Signal LEDs and a set of HFR decoder modules. TitanRR Super White Exterior Mirror Puddle LEDs
What was the look of the turn signal lights before you swap them? Also does the bottom lights in the rear light up from factory? I thought it didn't.

Also is the puddle light supposed to reach to the ground? In the picture it looks like all the light is shining on the door.
Reply 0
Oct 22, 2013 | 10:40 AM
  #53  
Quote: What was the look of the turn signal lights before you swap them? Also does the bottom lights in the rear light up from factory? I thought it didn't.

Also is the puddle light supposed to reach to the ground? In the picture it looks like all the light is shining on the door.
The look on the rear turn signals were a amber color and the two little lower ones do not light up at all. It was the flash from my phone that looks like they are turned on. Those are rear safety reflectors that light up when headlights or any direct light reflects to it there for looking like they are turned on.


On the puddle lights they do light up the ground a little bit but more of the light hits more of the side door.
Reply 0
Oct 22, 2013 | 10:56 AM
  #54  
looks sweet man nice work so far!
Reply 0
Oct 27, 2013 | 07:56 PM
  #55  
Quote: The look on the rear turn signals were a amber color and the two little lower ones do not light up at all. It was the flash from my phone that looks like they are turned on. Those are rear safety reflectors that light up when headlights or any direct light reflects to it there for looking like they are turned on.


On the puddle lights they do light up the ground a little bit but more of the light hits more of the side door.
Did you install those puddle lights yourself or go to a shop?
Reply 0
Oct 27, 2013 | 08:46 PM
  #56  
Quote: Did you install those puddle lights yourself or go to a shop?
I Installed them my self. Took me about 15 mins each or so.....
Reply 0
Oct 27, 2013 | 09:02 PM
  #57  
Quote: I Installed them my self. Took me about 15 mins each or so.....
How'd you do it? Easy or hard?
Reply 0
Oct 27, 2013 | 10:14 PM
  #58  
Quote: How'd you do it? Easy or hard?
It looks hard but all you need to do is do it slowly and carefully. Follow these steps from (WhiteIS Way) and should be a easy process.
Reply 0
Oct 27, 2013 | 10:47 PM
  #59  
Yo Tito I need some help with this install and what parts you have ordered plz help looks great
Reply 0
Oct 28, 2013 | 07:31 AM
  #60  
keep it up man sweet!
Reply 0