Blitz_714 ISF Build
#168
Brembo stickers are high heat one, as i purchased on Ebay, made in USA. That guy was from Pittsburgh. He had very good rating , the price with shipping like 15$ . Again there are lots of decals on there, so careful pick the one that has very good raing and paid for a few bucks more to get the quality .
#172
thanks for the info sorry for asking so much i got the stickers locally today ..am painting the calipers tomorrow check this steps to see if am going the right away
1-)sand them down
2-)3 coats of caliper PAINT not the spray paint right?! or thats fine?
3-)2 coats of gloss and then wait hours for drying
4-)stickers on and done..if am missing something let me know thru here or pm so i dont keep messing up your thread thanks again
1-)sand them down
2-)3 coats of caliper PAINT not the spray paint right?! or thats fine?
3-)2 coats of gloss and then wait hours for drying
4-)stickers on and done..if am missing something let me know thru here or pm so i dont keep messing up your thread thanks again
#173
Careful not to sand it too much just a bit to get good surface to prep, and clean it well , primer it , then spray it well . Practice a bit 1st on the cart board hold about 8 to 10 inches away from it, steady hand. 3 or 4 coats are fine, Then dried up , stickers and then gloss coats at last. let it dry at least 4 hrs if u dont have to drive the car right away even better