If I had the chedda!! But I'm going coilovers too and later on maybe cupkit if I don't do my V8 swap with air runners.

okay so this is what i have been working on. the stance is far from done but all i need now are some front UCAs to lay the front wheels down and that should finish the front fitment. i will be aiming to match up the fender and the rim lip. please keep in mind stance is a work in progress. :biggthumpup:

current specs are:
18x10.5 et+10
manufacturer lower camber settings at zero
current camber off of the alignment machine -7.52 at the front!

http://www.flickr.com/photos/cadiluv...7626861754126/

BEFORE.


THE NIGHTPAGER 30MM RCAS


NIGHT PAGER 30MM RCAS vs. STUDIO 1.5 INCH/ 35MM CAMBER RCAS


THE SWITCH UP



THE NEW RCAS INSTALLED
i chose to use the stock bolts to the spindle with pressure washers!



AFTER

before..



soon...

nice! im trying to machine my own RCAs. Never thought about the offset one. pretty cool!

that stance is bananas

I think your stance peaked in the first half of this thread. The new paint looks good tho.

thanks for the feedback guys!! keep it coming! =D

What size are your front tires? Looks like they're too wide

they really are but they were the cheapest at the time! the fronts are 255/35

from my blog..

"although i LOVE doing things to the GS i must admit that i feel relieved that it will almost be SATISFACTORY enough for this season! SCARFACE has definitely come a long way in very short period of time. actually way faster than i would like to admit. but soon enough i will just be able to sit back and enjoy all the effort that has been put into this build.
here’s a list of the few minor details still remaining before i can JUST chill and cruise!!
-Junction Produce Billet Grill (thank you Fizz Chicago)
-REpaint the hood (after the ****ed it up the day after i got it back from paint) and install color matched window visors (thank you PLATINUM VIP)
-Tinted headlights (thank you Lux VIP)
and i am probably forgetting something but its probably not important =/
i also want to thank all people who supported the build along the way! you know who you are!!! THANK YOU!"

love the pics im using the Tien coilovers with EDFC to complete the effect of the adj cas/cam plates 295/40-19s rear 275 front handling AMAZING

Hell yes! Cuban, any news if the rca's are going to be for sale or are these one-offs? I bought a set of night pager's to build my own rca's and I have been designing pretty much what your new rca's have accomplished: I am like 800 in R&D at this point for custom RCA's, so I rather desist if the STUDIO 1.5 INCH/ 35MM CAMBER RCAS are going to be for sale for 1stgen GS3.... at least I know more about machining and 3d modeling than before...

the specific set i installed in the pics is currently for sale! i went with a set a quarter inch smaller because my wheels are already 18x10.5et+10 up front. if you have facebook hit me up and i can link you to the STUDIO page!

@ Chris Cuban GS

Dude,your car is fricken sikk! Im loving it! Keep up the good work!