my 2jzgte gs build
04-25-09, 05:57 AM
#35
Registered User
Join Date: Apr 2005
Location: Skokie
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
Impressive
Excellent job!
Great that you are doing it yourself that does take a lot of time and whether you do it yourself of source the work out, its expensive so you're saving a lot by doing it yourself!
Keep it going!
Your car will look great when its done!
Great that you are doing it yourself that does take a lot of time and whether you do it yourself of source the work out, its expensive so you're saving a lot by doing it yourself!
Keep it going!
Your car will look great when its done!
04-26-09, 07:18 PM
#37
Nice. On the connector, get an answer? Exhaust side? Connects to? I think it's either connector 90980-11149 or 90980-11156 and I'll have to look at the colors on mine... Looking good!
04-27-09, 12:08 PM
#41
Do you need the connector or the wire color? The connector is one of the above part numbers. On the same harness, there is another plug, similar, about 12 inches away (or so). If that one is still good, look at the number on it (will be 4 numbers). That will correspond to one of the last 4 numbers of the part numbers from above. The other one is the connector you need.
If you just want what color are the wires, I'll take a look tonight when I get home.
If you just want what color are the wires, I'll take a look tonight when I get home.
04-28-09, 07:44 AM
#42
Rookie
Thread Starter
Join Date: Nov 2007
Location: nc
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
yeah i just need the wire colors of the wires in that plug. Which one is on the left and right? Also I drained all the tranny fluid and it looks more like oil, not really red, but doesn't smell burnt. What type of fluid do i need to put back in it? I bought like 9 quarts of toyota auto tranny fluid from toyota but i told them it was for a 94 supra tt auto. Is that right? I also got a thermostat for the 94 supra also. Is that right? thanks
04-30-09, 09:42 AM
#44
Rookie
Thread Starter
Join Date: Nov 2007
Location: nc
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Everything on the engine is complete ready to go in now. the dash and everything inside the car is in besides the front seats, door sills, and minor odd and end stuff. Still wondering about the tranny fluid and the wires in that plug. Anybody know?
04-30-09, 08:10 PM
#45
Good on the tranny fluid and the t-stat. I am going to be taking my front bumper off tomorrow night and promise i will look at the engine when I'm out there and post up the colors. Sorry for the delay - i am one lazy sob lately.