CA APR GTC-500 GT-wing
#1
APR GTC-500 GT-wing
Ever had to eat at a car show and had nowhere to place you food?! Think no more!! Never miss your flight again!, LAX to NYC in less than 8 hours! Ever look back at your rear windshield and say, "man! I hate seeing all those cars following me!", well here is your solution! Hahaha...
ok all jokes aside.
For Sale: Universal APR GTC500 70" GT WING (universal) for sale with custom @ryokurob Risers/stands, you will need to figure out a mounting solution. Currently the mounting that connects the stand is welded to my trunk. You're free to take photos to see how we welded the plates, or ill send you detailed photos if item is shipped. The OEM lip spoiler holes have been welded shut for a cleaner look. Once finished you obviously need to get the spots repainted. If you want the easy way out and probably more expensive, read below.
GS OWNERS will part with trunk as long as you give me yours in return. the downside to this, my paint is a bright dodge viper red and you will need to match you paint. Must be in perfect condition. I don't think there's a difference in trunks between models besides emblems.
Parts included:
GTC-500 Deck
Discontinued end plates by APR, these plates are hard to find and came off an old racer. Condition is fair and has some spots thats need to be re-cleared.
Ryoku Rob Custom Risers/Stands
Ryoku Rob Spacers. Spacers were added because the mounting with was too wide. Added 4 spacers in total which are 1/2 an inch each (2 on each side) O
Wing is $1450+tax (retail)
Custom stands/risers/Spacers by Ryoku Rob $250+
$1300
or
$1300 and trade for your OEM trunk.
(must be in perfect condition, color does not matter, it'll probably go to my spare parts corner)
I know this isn't everyones cup of tea, but leave your negative comments to yourself. I've heard it all, haha.
Cheers!
Yogi
ADDITONAL PHOTOS:
ok all jokes aside.
For Sale: Universal APR GTC500 70" GT WING (universal) for sale with custom @ryokurob Risers/stands, you will need to figure out a mounting solution. Currently the mounting that connects the stand is welded to my trunk. You're free to take photos to see how we welded the plates, or ill send you detailed photos if item is shipped. The OEM lip spoiler holes have been welded shut for a cleaner look. Once finished you obviously need to get the spots repainted. If you want the easy way out and probably more expensive, read below.
GS OWNERS will part with trunk as long as you give me yours in return. the downside to this, my paint is a bright dodge viper red and you will need to match you paint. Must be in perfect condition. I don't think there's a difference in trunks between models besides emblems.
Parts included:
GTC-500 Deck
Discontinued end plates by APR, these plates are hard to find and came off an old racer. Condition is fair and has some spots thats need to be re-cleared.
Ryoku Rob Custom Risers/Stands
Ryoku Rob Spacers. Spacers were added because the mounting with was too wide. Added 4 spacers in total which are 1/2 an inch each (2 on each side) O
Wing is $1450+tax (retail)
Custom stands/risers/Spacers by Ryoku Rob $250+
$1300
or
$1300 and trade for your OEM trunk.
(must be in perfect condition, color does not matter, it'll probably go to my spare parts corner)
I know this isn't everyones cup of tea, but leave your negative comments to yourself. I've heard it all, haha.
Cheers!
Yogi
ADDITONAL PHOTOS:
Last edited by YogiFTLC; 06-09-15 at 10:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post
deckdout2
3Gen GS460 / 450H / 430 / 350 / 300 Classifieds (06-12)
2
02-25-10 02:49 PM