DE FS - Ichiba V2 20mm Wheel Spacers
#1
Rookie
Thread Starter
iTrader: (4)
Join Date: Nov 2010
Location: DE
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
FS - Ichiba V2 20mm Wheel Spacers
I have a set of Ichiba V2 20mm Wheels Spacers I am looking to sell. I purchased these spacers from CL member b2designs a few weeks ago, so he can vouch for me. They were on the rear wheels of my IS350 for only 1 day before I removed them, simply for aesthetic purposes. They are in like-new condition, aside from a few scratches they receicved from installation. Just to verify, the spacers already have the studs pressed in and come complete w/ bolts and hub-centric rings. Retail on these spacers are pretty standard, but I'm asking $80 for the spacers + the cost of shipping. There are pics below of the actual spacers. If you're interested, let me know. Thanks.
Trending Topics
#8
Rookie
Thread Starter
iTrader: (4)
Join Date: Nov 2010
Location: DE
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
They should, but you may want to double check. I ran the 20mm spacers on the rear wheels of my IS350 for a day w/ no clearance issues or rubbing, but my rear wheel offset is 50mm. Rear wheel offset of the IS-F is 55mm, AFAIK, so there's only a slight difference. However, the bolt pattern is the same (5x114.3) and the front wheel offsets are the same (45mm) for both cars.
#11
Rookie
Thread Starter
iTrader: (4)
Join Date: Nov 2010
Location: DE
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
The 'open ended' lugs shown in the picture (which is what I think you are referring to) screw onto the bolts from the wheel hub, thus attatching the spacer to the hub. Afterwards, you would place the wheel onto the spacer and use your IS300 lug nuts to secure the wheel. As long as your IS300 lug nuts have a thread of 12x1.5, they will work.
Thread
Thread Starter
Forum
Replies
Last Post
JBLUR
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
1
11-27-16 10:16 AM
whazzzzuup
Wheels and Tires Classifieds
2
06-27-10 10:23 PM
tungo
Wheels and Tires Classifieds
4
08-06-09 11:19 PM