FL 98-05 GS300 Turbo Parts
#1
Lead Lap
Thread Starter
98-05 GS300 Turbo Parts
I have the following for sale:
Up for sale is my Haltech PS2000 with Map Sensor and twin Haltech Igniters. Darin at DD Tuning had to cut the harness at the firewall due to the way it was installed from the last tech but you can put it back together. The only reason for the sale is due to needing a stand alone that can control the line pressure for my new built automatic. $1400 for Haltech, Igniters, Map Sensor. - Priced to sell quick!
2JZGTE VVTI Stock Twin downpipe / Midpipe made for the 98-05 GS300 / Aristo swap to fit JSPEC Stock Twins, Made by Darin at DD Tuning set up for a wideband $250.. Firm on the price, I paid $200 for the downpipe and another $250 for labor and materials at DD Tuning, I can scan the receipt, as you can see there was some heavy fab work to make this downpipe fit.
I'm selling a set of Manley Springs / retainers and stainless steel valves. All stock size. $200 for the Manley springs and retainers P/N MAN26130
Manley Stainless Steel valves, stock size, under 400 miles of use. $300
I was using these springs with Titan 280's. I bought the cams and springs from Titan at the same time so I made sure they were good for the cams. They are good for the 9.9mm high lift, I wouldn't use them on the 10.4mm lift cams though.
After months of development and testing in race and street applications, we are proud to release the much anticipated Titan Camshafts. Gone are the days of being stuck to choose from 1-2 durations of standard lift camshafts and having to base your tune and setup around it. These camshafts are typically suited for engines with turbo combinations 70mm or larger.
Titan Cam Intake - 280 Duration / 9.9mm lift Titan Cam Exhaust - 280 Duration / 9.9mm lift
**Denotes High Lift / Valve Springs Needed**
Manley 26130K Toyota Supra, 2JZGT/2JZGTE 6 cyl. Valve Spring Kit- Spring/Retainer $200
Serpentine Belt Tensioner X2 $30 each
Alternator: $55
Oil Catch Can $20
Misc silicone couplers $20 for all
Ebay BOV $20
Tial Clone BOV $35
Aristo GS300 98-05 stock side mount intercooler
2JZGTE VVTI Stock Cams $50
JSPEC Stock Twins with True Twin Conversion Mods, these are strong, my GS300 ran 114 MPH with them in the 1/4.. Welding by Darin at DD.
2JZGTE VVTI Fuel Rail and Injectors 440cc $60
Misc Stock Twin Pipes $30
V160 Trans inspection plates $40
RB Chromed PS Bracket $40
Up for sale is my Haltech PS2000 with Map Sensor and twin Haltech Igniters. Darin at DD Tuning had to cut the harness at the firewall due to the way it was installed from the last tech but you can put it back together. The only reason for the sale is due to needing a stand alone that can control the line pressure for my new built automatic. $1400 for Haltech, Igniters, Map Sensor. - Priced to sell quick!
2JZGTE VVTI Stock Twin downpipe / Midpipe made for the 98-05 GS300 / Aristo swap to fit JSPEC Stock Twins, Made by Darin at DD Tuning set up for a wideband $250.. Firm on the price, I paid $200 for the downpipe and another $250 for labor and materials at DD Tuning, I can scan the receipt, as you can see there was some heavy fab work to make this downpipe fit.
I'm selling a set of Manley Springs / retainers and stainless steel valves. All stock size. $200 for the Manley springs and retainers P/N MAN26130
Manley Stainless Steel valves, stock size, under 400 miles of use. $300
I was using these springs with Titan 280's. I bought the cams and springs from Titan at the same time so I made sure they were good for the cams. They are good for the 9.9mm high lift, I wouldn't use them on the 10.4mm lift cams though.
After months of development and testing in race and street applications, we are proud to release the much anticipated Titan Camshafts. Gone are the days of being stuck to choose from 1-2 durations of standard lift camshafts and having to base your tune and setup around it. These camshafts are typically suited for engines with turbo combinations 70mm or larger.
Titan Cam Intake - 280 Duration / 9.9mm lift Titan Cam Exhaust - 280 Duration / 9.9mm lift
**Denotes High Lift / Valve Springs Needed**
Manley 26130K Toyota Supra, 2JZGT/2JZGTE 6 cyl. Valve Spring Kit- Spring/Retainer $200
Serpentine Belt Tensioner X2 $30 each
Alternator: $55
Oil Catch Can $20
Misc silicone couplers $20 for all
Ebay BOV $20
Tial Clone BOV $35
Aristo GS300 98-05 stock side mount intercooler
2JZGTE VVTI Stock Cams $50
JSPEC Stock Twins with True Twin Conversion Mods, these are strong, my GS300 ran 114 MPH with them in the 1/4.. Welding by Darin at DD.
2JZGTE VVTI Fuel Rail and Injectors 440cc $60
Misc Stock Twin Pipes $30
V160 Trans inspection plates $40
RB Chromed PS Bracket $40
Last edited by adamgamz; 01-29-12 at 01:56 PM.
Thread
Thread Starter
Forum
Replies
Last Post